Had a little time this weekend to work on the shifter. Came up with a idea but think I will change it up a little.
think I will use a straight piece of handle bar with a spacer under it so it isn't sticking out as far. then I started working on a shift handle and came up this. drilled a hole for it to slide onto the shifter then trased out where I needed to notch to get it all the way on.
Then decided to shape the handle to kind of match the tanks and routed the edges with a 45 router bit trying to look like machined.
I will probably cut it down and see if I can make like a t-handle or something like a round topper.
![IMG_20220625_160905670_HDR.jpg IMG_20220625_160905670_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/198/198651-IMG-20220625-160905670-HDR.jpg)
![IMG_20220626_132426247_HDR.jpg IMG_20220626_132426247_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/198/198652-IMG-20220626-132426247-HDR.jpg)
![IMG_20220626_132546915.jpg IMG_20220626_132546915.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/198/198653-IMG-20220626-132546915.jpg)
Then decided to shape the handle to kind of match the tanks and routed the edges with a 45 router bit trying to look like machined.
![IMG_20220626_141409932_HDR.jpg IMG_20220626_141409932_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/198/198654-IMG-20220626-141409932-HDR.jpg)
I will probably cut it down and see if I can make like a t-handle or something like a round topper.
![IMG_20220626_142210033_HDR.jpg IMG_20220626_142210033_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/198/198655-IMG-20220626-142210033-HDR.jpg)