Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
us56456712
Reaction score
9,069

Latest activity Postings About

    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      I used 270 and 276, which is close enough that spoke head washers on one side centered the hub. Pro wheel builder gave me 269 and 274...
    • us56456712
      Ski flying used to be much more dangerous. The agony of defeat dude wasn’t the only jumper that day to qualify to the hospital. They...
    • us56456712
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      I’ll run it again and try and get it right. I think I saved a photo of my old numbers. It’s close now. New spokes are cheap enough, but...
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      Oh no helpful you are. I’m going to revisit my calculations. I appreciate your input. Now I know where I went wrong. I reordered my...
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      Dah. Another dah is that the stuff for this project I’ve been ordering has been either returned to the vendor or thrown out by the post...
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      Yeah, your right, gives me something o focus on and keeps me busy
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      The LBS dug out an old, laminated, yellowed spoke length chart. They keep it rolled up in a cardboard tube. It’s poster sized, sort of...
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      I think the drive side had larger spokes, I’m going to use hub washers there. Also, the hub originally wasn’t laced in a normal way...
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      I got the spokes right finally after playing musical spokes. The hub is centered, the spoke tension is good and the spokes end at the...
      • image.jpg
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      They are both sides flush with the nipple screwdriver slot. Nothing sticks out the nipple and no threads show on the other. Nice and...
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      Like I said I tried to tension it. Spoke length is off. You can’t move it over enough even if the spokes stick out and are hardly in on...
      • IMG_0299.jpeg
      • IMG_0298.jpeg
    • us56456712
      us56456712 replied to the thread ORBO Tracker tribute.
      My measurements are right. None None of the spoke length calculators give you a consistent answer. The hub is too weird. Never had a...
      • IMG_0052.jpeg
      • IMG_0059.jpeg
      • IMG_0061.jpeg
      • IMG_0065.jpeg
      • IMG_0067.jpeg
      • IMG_0070.jpeg
      • IMG_0071.jpeg
    • us56456712
      I got one of these. No baskets, someone might steal it for the baskets.
      • IMG_3872.jpeg
    • us56456712
      So…. Dag-gone! You’d think bolting some old rusty parts together would be a snap! NOT!!!! Wow…. Super tough to get the rear wheel...
  • Loading…
  • Loading…
Back
Top