I'm car restorer, motorcycle guy . . but bikes are interesting to me. I have built few. I decided to build a BTR, something that looks like it is from the 1920s I guess. So I started with a Huffy dual cantilever frame and started cutting. At this point only the rear section is still the original frame. I haven't decided about the forks yet. The frame is stretched about 5 inches and I still have a bar to add ( dual straight bar frame ), but decided to post a pic. Thanks
I added the other bar. Still deciding on forks . . . I want the front lower to bring the upper bar parallel to the ground. Would like to kick the front tire out to do this. Ideas?
I added the other bar. Still deciding on forks . . . I want the front lower to bring the upper bar parallel to the ground. Would like to kick the front tire out to do this. Ideas?
Since I had the stock fork I started to modify it. I cut about an inch off the bottom including the dropouts. I then cut some steel and made my own dropout, offsetting the wheel more forward, as well as lowered. I will build a truss for this as well. If I don't like it, oh well.