1935 Colson - update 3/4 Finished!
- Thread starter GTCOMA
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Re: 1935 Colson - A New Plan
Hey,
Love the build so far, but I have some advice for you concerning the fitting of this hub. You will need tog et different Nexus No turn washers in order to have the cassette joint pointed parallel with the frame. If you don't the cable will interfere with the chain or worse it will put a lot of pressure on a plastic part that will eventually fail. I think the green left side washer is the one you want. You can buy a whole trim kit for $20 and you get a bag of replacement parts alongs with 3 sets of no turn washers.
joe
Hey,
Love the build so far, but I have some advice for you concerning the fitting of this hub. You will need tog et different Nexus No turn washers in order to have the cassette joint pointed parallel with the frame. If you don't the cable will interfere with the chain or worse it will put a lot of pressure on a plastic part that will eventually fail. I think the green left side washer is the one you want. You can buy a whole trim kit for $20 and you get a bag of replacement parts alongs with 3 sets of no turn washers.
joe
GTCOMA said:A little progress. I got most of the paint off the frame and all the paint off the fork. Test fit the wheels. All the hubs and tires fit the frame just fine.
The nexus 7 amazingly fits fine...
The paint free forks
The huge tire up front
Re: 1935 Colson - update 2-17
Thanks Joe. I've been meaning to order those washers, but I haven't been able to figure out the color I needed yet. It has the black/Gray set on it now. Any clue of a good place to order them from?
Thanks Joe. I've been meaning to order those washers, but I haven't been able to figure out the color I needed yet. It has the black/Gray set on it now. Any clue of a good place to order them from?
Re: 1935 Colson - A New Plan
I like your Marilyn Monroe red velvet pictures :lol:
GTCOMA said:The frame is finally all stripped and shiny!
Unless somebody has an idea for a killer paint scheme, I think this one is going to stay au naturel.
I like your Marilyn Monroe red velvet pictures :lol:
Re: 1935 Colson - update 2-19
Do you have those "golf bag carrier" handlebars anymore? Those might work upsidedown, or rightsideup? Not sure which way is correct for those things :lol:
Do you have those "golf bag carrier" handlebars anymore? Those might work upsidedown, or rightsideup? Not sure which way is correct for those things :lol:
Re: 1935 Colson - update 2-17
I just ordered the nexus spare parts kit from Niagara Cycle for $20. It has two sets of nonturn washers, the cassette joint and some other odds and ends.GTCOMA said:
Re: 1935 Colson - update 2-19
I have those on my Mr. Mastodon build right now.
I do still have a set of those Torrington army issue bars, but they are crazy wide. I have a few other sets I might try on too.
necessaryevil said:
I have those on my Mr. Mastodon build right now.
I do still have a set of those Torrington army issue bars, but they are crazy wide. I have a few other sets I might try on too.
Re: 1935 Colson - update 2-19
This thing is so dead on! I love the tire combo fat in front is cool! 7 speed Nexus hubs are always cool,
and if you run the skiptooth It will be to cool! Great looking bike
This thing is so dead on! I love the tire combo fat in front is cool! 7 speed Nexus hubs are always cool,
and if you run the skiptooth It will be to cool! Great looking bike
Re: 1935 Colson - update 2-21
They look good to me! You having doubts about grinding out those teeth on the cog yet? :lol:
They look good to me! You having doubts about grinding out those teeth on the cog yet? :lol:
Re: 1935 Colson - update 2-21
nice! :mrgreen:
nice! :mrgreen:
Re: 1935 Colson - update 2-21
I was hoping I could fnd a newer chain with a half inch pitch that was wide enough for the old skiptooth sprocket. So hopfully I won't have to grind off any teeth
necessaryevil said:
I was hoping I could fnd a newer chain with a half inch pitch that was wide enough for the old skiptooth sprocket. So hopfully I won't have to grind off any teeth
Re: 1935 Colson - update 2-21
drat... It looks like you are correct. Maybe a change in plans then. Maybe back to a regular sprocket or try to rebuild the morrow hub and make it a single speed...
stretch said:
drat... It looks like you are correct. Maybe a change in plans then. Maybe back to a regular sprocket or try to rebuild the morrow hub and make it a single speed...
