Coda

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Rear tire held air overnight; on to the front wheel. Script hub, believe correct for an early Sting-Ray.

405ED7E9-BEF9-480A-B1E9-067FB0140CB7.jpeg


Center-stamped S7. Definitely correct for a ‘65. A litttle more evidence this bike has been together a long time.

0F8A2B5A-0C3F-439B-A9FF-58943CEDD69A.jpeg


Crusty.

54CE48F2-0A22-4733-9A89-FF7E299D3417.jpeg


July of ‘69. Tire is pretty weak, but I may see if I can get a few more miles out of it. Just have to keep it under 60 mph. Wonder if that’s blood on the rim, right below the 9 in the date code.

E2DF9D73-31E1-4F89-85F9-52E457208375.jpeg


Uh-oh. Bent axle with frozen hardware.

B9710806-8CBB-42C7-987E-6D03F6A7E9AA.jpeg


Ordered a Union replacement. Looks correct, and the provided measurements match up as far as I can tell. Hope it shows up in time.

furyus
 
Last edited:
Broken front axle: Rider probably nose-landed too many sweet jumps.

Blood on the rim: Rider must have had a high hemoglobin count based on the viscosity.
 
Broken front axle: Rider probably nose-landed too many sweet jumps.

Blood on the rim: Rider must have had a high hemoglobin count based on the viscosity.

You know, maybe it all goes back to this day:

A85AE241-B672-4C4B-9CD2-769A1BE413CE.jpeg


and perhaps also explains this:

9E68A5BF-9E60-4DCE-A540-C6B552CD4DB4.jpeg


which I’ve remedied by buying this:

A2592899-92D4-4D96-8279-50FBC87BD21F.jpeg


As you would expect, I’ll only be using the wedge from the nice, shiny stem. Its practically mint condition will be hidden away from view and won’t detract from my bike.

I’ll probably leave the blood on the front wheel, too.

furyus
 
Isn’t the internet great, at least parts of it? Less than 72 hours after finding a bent axle I have a NOS vintage replacement. Union brand, made in Germany. The bend in the old axle is fairly evident.

0575CD2A-E04E-4946-93FF-1DAD8FE54888.jpeg


What I assume are the original bearings for this axle/hub, manufactured by New Departure. Soaked them for a bit in degreaser and they’re ready for service. Simple little things, really, but at 3/4” and fifty-some years old, they say a lot about a different time when things were built to last.

60B68FAD-3225-4BEA-851E-26061BD79AE2.jpeg


furyus
 
Right rear dropout tweaked.

931691DD-8A37-4064-996E-2F0A74B12151.jpeg


De-tweaked.

5AD3A9DF-A2DE-4522-B38F-1B1E41853854.jpeg


Kickstand cleaned, ready for grease and re-installation. The rust is along for the ride.

062CC670-83BE-4028-B8A5-011C1B8DEEE9.jpeg


This stand has stood a few times.

23F41D0E-184B-49C2-951F-F51418193230.jpeg


Crank hardware, reporting for duty.

5F429589-2554-4090-8AE3-D2AC9DD31086.jpeg


Union chain from West Germany. Dies ist die richtige kette. Fand es bei eBay.

7B8F5C7B-8BC1-4AF9-9F9D-DAC0002B72F3.jpeg


The left crank arm is rusted. No correction necessary.

ABCA8F71-DA62-4C41-B201-72DBF3732CFD.jpeg


These correct pedals are pretty much worn out. In other words, perfect.

5C3EBD0D-A7FC-4F1A-88AB-C32AF8CBC6C2.jpeg


Ten days left. Pretty simple bike, but with work and life it’s going to be close. It’ll be tough to get decent finished pics with no light in the evenings by the time I get home from work, but it is what it is, right? Besides I’m not finished yet.

furyus
 
Last edited:
Front wheel is rough. Rusted, out-of-true and at about the end of its service life without some serious attention. That’ll have to come later. It does have a new axle and freshly greased bearings.

000849C5-9836-4BE7-8F0E-5C0729FB217E.jpeg


Rim strip is fini. Nice bits of color on it, but thoroughly spent. And I don’t have another, and the build-off is over in a week.

FDD166F7-88A8-462B-823A-D52C1C26B642.jpeg


Solution? A couple layers of electrical tape. It’ll work for now.

C61BFB51-66D9-47A8-BDFF-0B3937C085AC.jpeg


Front tire is either a September ‘76 or September ‘66. If I recall, this tire came off a ‘66 I had years ago. The older Schwinn Approved tube that was inside it reinforces my speculation.

29F2EDF6-6A74-41D6-9C60-0393D3E2EC32.jpeg


Front and rear wheels are done. Hope to have a roller tomorrow night.

F928EA40-D713-444C-B524-E6641DEF23F1.jpeg


Good ol’ American rubber on both wheels. Hate to wear it out, but what’s the point of keeping it hidden away in a closet?

AE282696-5318-47F7-9142-42F969A42744.jpeg


furyus
 
Looking good for 50 year old tires!

Like I said, they’ve been in a closet for long enough. I bet I’ve owned them 9 or 10 years. Someone else had ‘em stashed before that. Surely I’m just the current caretaker of this bike, but I may end up using a few consumables while she’s mine.

furyus
 
Here we go...

1BE0DC25-CBC4-4441-BF0C-37B7BC484484.jpeg


80FAC022-1C43-4A58-9FA3-804421680618.jpeg


EDB0AC8E-D1BE-49D3-A9B9-F7D5A8A6F7D4.jpeg


Obviously not finished, and even this roller has to be tweaked and torqued. One week left!
furyus
 
Last edited:
Nice example of why I use Gibbs Lubricating Oil. If you’re into patina, check out the difference in the colors of the rust before and after an application of Gibbs. By application, I mean spraying a dollop of Gibbs on a paper towel and wiping this brake strap down, maybe ten seconds work.

Before:

2BCBDDAB-B8BF-48E9-AEBB-A03F5BAA1D7D.jpeg


and after:

835B1510-3D47-49CB-89CE-7F20241932AC.jpeg


Subsequent applications will make the colors richer, and the stuff is dry to the touch pretty quickly, unlike WD40 and silicone sprays. I’ve applied Gibbs to this entire bike, save the tires. Gotta add this stuff to your workbench if you dig preserving patina. Only place I’ve seen it is eBay, and no, I don’t sell it.

furyus
 
Thank you very much, Odder. I know you like your Sting-Rays, so I appreciate it.

furyus
 
This picture really got me thinking.

18F395DA-EB4F-4C58-B509-9EBDBBFBC2D4.jpeg


I’ve been keeping this exerciser seatpost stashed for a long time.

85D049A5-B309-4EAC-B146-63E04995CF67.jpeg


I’ll take a few inches off the bottom, thank you.

66281CF4-C42D-492D-B9DC-D9939324F938.jpeg


Nice old Persons sissybar that came with the bike. Previous owner added it, and since I’m fairly certain this Sting-Ray was sold as a ‘65, it never would have been original to the bike anyway.

93AB70A3-542F-4662-9311-BFE958E687AC.jpeg


987D81D0-5720-48ED-8655-FBEFA3B62998.jpeg


HERESY! HERESY, I TELL YOU!

4CDB6AE5-E3D4-404B-9841-76B956499AA7.jpeg


AC71D004-8AE7-4800-8E1C-1363DE52B082.jpeg


furyus
 
Old Schwinn chubbies. Not sure what they came off of.

5F5021CC-E6A5-4DB3-9169-7CC84C3E80E7.jpeg


Made these streamers years ago out of an old Schwinn inner tube. They were on another build-off bike name Puppy Dog Tails. Puppy is gone, but I saved the streamers.

B5941E93-5FF2-42BF-9834-C262F05E0A17.jpeg


Grips and streamers. The streamers are actually very close in length left to right, but this pic make ‘em look way off. But they aren’t perfect like factory streamers, either, just like the rest of the bike.

0C72B891-A7B8-48D2-8194-3C6640CE55CC.jpeg


furyus
 
Let’s get started!

9D310490-23FF-4414-BC2F-80C9A195AE22.jpeg


Trim trim. Sorry Steve. But I did save the best part!

A3832061-1DE3-42BE-A003-14B68565AA98.jpeg


Emery cloth. Scuff scuff.

BE99E8DF-C990-49DC-B6D6-F13547FFC304.jpeg


Grease is the time, is the place, is the motion
Grease is the word

And in this case, of course I’ll use official Schwinn grease from the freewheel off my ‘63 Superior.

AEC76594-B24B-4887-947B-8DDC0C75E9BE.jpeg


Dab dab dab blot blot blot.

A4DB1850-C535-435A-938D-285F71A35BB6.jpeg


And

C1318D34-C547-4444-AC8A-ED761E8C1B51.jpeg


furyus
 
the weathered/scuffed sticker is BRILLIANT :thumbsup:

I think when I figured out how to do this I made more of a Homer Simpson d’oh sound (my wife yelled down “are you okay?”), but I’ll take the rare brilliant if you’re handing them out. Thank you.

furyus
 

Latest posts

Back
Top