Faux Pedersen Ortho

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MazdaFlyer

Like “RadioFlyer”
Pro Member
Joined
Nov 22, 2011
Messages
4,608
Reaction score
11,919
Location
KS
I started on this unique contraption on January 4th. Since the rules have been revised I guess I will document the transformation of it from a “frame” to a rideable Bike. The biggest obstacle is creating a long tube fork without using a welder. I have sourced some parts, a 1” threaded fork, 5/8” threaded rod, nuts, washers, set screws, 1” seat post, 1” thread-less headset and a few other hardware parts. More to come.
b63a3df1c2ea37f0c4fbff4ca81c80fc.jpg

The unconventional fork goes together like a puzzle...one solution only.
d0bbceacc5454eeb4df10041b96329e7.jpg



Sent from my iPhone using Tapatalk
 
I think that would look awesome with some triple trees! Get the extra long chopper ones and they'll probably fit :)
The head tube is 22” long. I’ve thought about a chopper type fork but I’ll probably keep it cheap and simple unless a bargain comes my way. I’m working on mocking up the rat hybrid fork. Think I’ve figured out a mechanical way to make it work safely.
 
Splicing in a piece of pipe at your local weld shop should'nt be very pricey. It'd also be stronger than anything you could bolt together.

Carl.
 
26648407_10159858034265597_274330522_n.jpg

Now you can run a 40" front wheel haha im following this build
I had one of the 32” Walmart Genesis Bikes but sold it last summer.
 
Splicing in a piece of pipe at your local weld shop should'nt be very pricey. It'd also be stronger than anything you could bolt together.
Carl.
Yah that’s the easy way but I think my boat anchor job will have backup failsafe backups. Then it’s my work. If it doesn’t prove to be “stable” I’ll go the fabrication route.
You may be right but I’m prone to avoid the norm. Your idea would be lighter also...
 
I also like the merit of doing your own work.
IF I had my bike tubes anodized, it would have been the first outside work I've ever had done in 4+ yrs here.

Carl.
 
Last edited:
I did a little 28 degree fab work on garage drive this morning. I’m using some 7/8”OD x 5/8” ID sleeves inside the fork headtube and seatpost tube with a series of set screws with lock nut spacers. The 5/8” threaded rod is continuous.
f7a874c9e84604ec78e202e1566bec29.jpg
1eab1d61097af763f75093df67916120.jpg
 
26648407_10159858034265597_274330522_n.jpg

Now you can run a 40" front wheel haha im following this build
Just noticed the frame modification...creative thinking!
 
Looking forward to seeing what you plan to do with this unique frame. I had fun with the stock one that I had. It's insane how long that steertube is.
 
Looking forward to seeing what you plan to do with this unique frame. I had fun with the stock one that I had. It's insane how long that steertube is.
Not sure that it will be too radical, although @DeFresh’s frame modification looks interesting. I still have a complete Ortho bike with a replacement frame which I’ve tweaked into a fun comfortable rider. My experience with Virtue Cycles was a positive one.
The frame I’m using in the Winter Build is the original that arrived all scuffed and scratched up. It needs refinishing or could be left outside to gain some patina and rust.
The rider...
d6878f2a288a0349b8aeb8066c1a6dd7.jpg
 
Last edited:
Original thought process for long stem fork has seen a few changes and revelations as I put the ideas into action. The whole thing has to go in through top (actually through bottom on second thought). The last nut at bottom crown of fork with a couple of extra set screws at fender/brake mount holes. It will work I think...again one way only to assemble and everything in order.
30ae89ec66a376a0bd7cccf6492a0e44.jpg

bf419d2c9fd29a5e39d43b9d065d0fbd.jpg
bf6221d87f3e81f0893a63b19a372e53.jpg



Sent from my iPhone using Tapatalk
 
Last edited:
Another ode to the past... When I built my cargo bike I just welded stems together. It is still holding.
 
I got out to the garage and driveway shop today...a warmer day. I finished drilling and taping the set screw holes. I fit the lower bearing race, shortened up the threaded rod to final length and assembled the fork components. I had to file off the corners of the nuts to get through the bearing cups, not much just the sharp edges. The set screws also needed to filed down a bit. Everything fit like a glove. Also dry fit (China style) the threadless headset to test assembly. I had one stem to further move the mock-up along. The stem and bars are for evaluation at this point.
ed35436613d63d3080b06f4bc98440e4.jpg

1e68d6ed29b461bbcc9a458c07d8236d.jpg

e0ad104b2a663bd32fcbf514ab50ff7b.jpg

22ad945ab2d20904249a91721ff781f5.jpg

4ffc734ba686666fcb964d19f4a9adfd.jpg

194cf5b1f74810e116ef01ea1fe2d331.jpg

4ac7e58f052ac1e21a6b07011d5e2fae.jpg

I made a parts list...some I have, some I’ll have to round up. Now that I have a fork that will work I’ll start dealing with the rest of the concept.
I have a couple of potential wheelsets, SS and 3spd, along with a couple of sets of tires. It will be good to see the stance.
 

Latest posts

Back
Top