Help with kickstand for Dyno-Glide 24

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 26, 2017
Messages
280
Reaction score
660
Rating - 0%
0   0   0
There is a plate below BB for mounting a kickstand but nothing I have fits (including Greenfields). Any ideas on a kickstand that will fit? One odd thing is that slot for bolt is not in middle but offset toward chainwheel. See pics below. Thanks for any input.

dyno7.jpg
dynodwg.jpg
 
I had the same thing on my Dyno, no kickstand. Those cheap ones from walmart that adjust work great. Just leave off the top bracket.
When I went to 3" big tires I raised it up a notch.
50147_b1d72e486294575a7e41b17dcc4c44fc.jpg

8ade622b-74d4-4fcf-9bba-d7fbbd82e1eb_1.b62cb00335f90ed8aa2982db9b920c7e.jpeg
 
Mr. Wildcat:
Excellent! A cost-effective solution is always appreciated.
Thanks, Andy
 
No problem.
I'm testing a theory. Is there a 4 digit number just in front of the kickstand mount on your bike ? On mine it seemed like the month and day of manufacture. Another Dyno seemed that way too.
49138_739688af377042237be03a0ece57fb06.jpg
 
A letters and numbers yes, but more than four digits: MT80806393. Note that this is a 24-inch Dyno-Glide, which could make a difference.
 
I had a couple 26" Dyno glides with MT and numbers. I think yours is 1998. Do you have a D sticker or a nameplate on the head tube? The 4 digit number is separate in a different spot from the serial number. On mine, The main number is on top of the BB:
48893_48dcd0f6f88cdd52e5e6c06011b10922.jpg


The 4 digit number is near the kickstand bracket on front.
 

Latest posts

Back
Top