Rat Rod Blades Challenge 2021 - Build thread

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Padauk Basher
Day 3 (I think)

Got a pound of leather scraps off the net.

Came with some thick decent sized pieces but only two colors. It's like sofa leather or something.

Top one is an orange brown, but it looks light brown in the photo.
20210305_155859.jpg

20210305_155835.jpg

I was going to use the orange, but the dark brown actually looks better with this knife.

Opened up the PU leather sheath to get a template. I
20210305_160044.jpg


Added my own extras to it
20210305_160627.jpg


Cut, cut, cut
20210305_162653.jpg


Stab, stab, stab
20210305_165537.jpg

Stabbed prematurely. Should have glued first then made the holes through all three layers. Oh well, lessons learned, I'm making this up as I go along.

Gluing the spacer thing.
20210305_172116.jpg


Fold and glue
20210305_172441.jpg


Started with a loop cross stitch, but didn't like the look for this build. Decided to leave it in the top third, but then do a two needle stitch from the bottom two thirds up and overlap the cross.

Don't know if I'm calling these stitches the right thing. Still making this up as I go along .
20210305_181923.jpg


Ah crep, two needle stitch is going to be tough with only one needle.
20210305_183141.jpg



Snap... Motherfather!
Ok, I'm done for the night.
20210305_183758.jpg
 
I broke down and chewed the binding, tastes like chicken. I used a double constrictor knot. There is rabbit poo glue comming off and staining the binding. I’m done.View attachment 152174
I can’t believe how firmly attached the flint is to the handle now that the rawhide lacing has dried. All it’s good for is to saw grooves in shafts. Does a saw count as a bladde?
 
Started over with a two need stictch and some nylon thread. Much stronger. Was going well, but had to use a smaller guage needed as my second needle.
It inevitably broke part way down.
20210306_132754.jpg


It can be done, but I don't recommend this without actual leather working tool.

Gonna jump online and see if I can pick aup a cheap set to finish this off. Before I destroy any more of my wife's sewing kit.
 
Man, I haven't been getting updates on this thread. Some cool stuff happening here the past few weeks.
 
Started over with a two need stictch and some nylon thread. Much stronger. Was going well, but had to use a smaller guage needed as my second needle.
It inevitably broke part way down.
View attachment 152279

It can be done, but I don't recommend this without actual leather working tool.

Gonna jump online and see if I can pick aup a cheap set to finish this off. Before I destroy any more of my wife's sewing kit.
Being the kind of person that tries the same thing repeatedly expecting a different result, I found the cheapest set of leather tools on Amazon I could find.

I'm sure they'll be terrific. Like all the cheap tools I buy from Amazon.
1615085284885.png


Probably no updates from me until after they arrive.
 
That's awesome. I love the liners. Are there two in there?
Yes, well technically no. The white one is real liner material. The black one is cut from the Folgers coffee lid back couple pages ago cuz my uncle liked his coffee. I struggled to epoxy the handle together until I figured out that it needed the black Folgers layer in there. And now you have the rest of the story....
 
Started over with a two need stictch and some nylon thread. Much stronger. Was going well, but had to use a smaller guage needed as my second needle.
It inevitably broke part way down.
View attachment 152279

It can be done, but I don't recommend this without actual leather working tool.

Gonna jump online and see if I can pick aup a cheap set to finish this off. Before I destroy any more of my wife's sewing kit.
Stitching might be giving you trouble, but the leather is cool as can be.
 
Looks great @Swampthing !

Can you arrange your post to put your three favorite pics at the top.
This is to make sure you get the pics you want displayed when I do the voting thread.

Yes. Thanks
Something went sideways when I was posting the first time.
These three show both sides and open.
 
Goodwill Hunting Knife final fotos

I don't remember exactly when this build challenge ends, but I've got a busy couple weeks ahead so I will post my final fotos here, @Verrt .

This was a fun challenge, thanks for hosting Verrt. It kept my creative juices flowing for a couple of weeks, and has been a fun project to show to friends and family.

I am including 3 photos, one 'before' or 'started with' photo, and two finished shots.

Looking forward to everybody's final fotos too!

Started with a 10" saw blade
145735536_257136285983250_670981820852367222_n.jpg


Mesquite handle from my AZ woodpile epoxied and pinned and shaped on the tang.

163523424_447163656623134_4952687453745738379_n.jpg


Tandy Leather sheath kit custom dyed and stamped and fit for GHK.

164025540_848069882444631_1443633238345975573_n.jpg
 

Latest posts

Back
Top