BO15 WAHA-SEDB-3 (TRIKE-TOR...2nd Place)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
You can still use vinegar (no salt) for a non rusty old steel look. Just rinse the vinegar and immediately spray with WD40 to prevent rust from starting. Then to prevent future rust, rub in some boiled linseed oil.
 
A horn arrived today. Anxious to hear what it’s got. I’ve read mixed reviews, so it remains to be seen as to what it will do.
e74cc38343c2c9e22c0c388412975b3b.jpg

cead8b455402c0a4f25eb4e389e512d5.jpg

bc87454947bde34c8a5e963cf39fd2bf.jpg
 
A horn arrived today. Anxious to hear what it’s got. I’ve read mixed reviews, so it remains to be seen as to what it will do.
e74cc38343c2c9e22c0c388412975b3b.jpg

cead8b455402c0a4f25eb4e389e512d5.jpg

bc87454947bde34c8a5e963cf39fd2bf.jpg
Interested in hearing what this sounds like too. Been looking at that same horn to put on my car. Want the Beep Beep sound like an old Jeep or Beetle.

Sent from my SM-G986U using Tapatalk
 
It is loud, not really a Beep Beep though. Somewhat like an old VW horn. Heavy duty construction.
f7c3b746683aa59f4584607ecbf6afc6.jpg

Wiring test mock-up, now to figure out where to mount.
 
Last edited:

WOLO Model 370 Beep Beep horn test.
 
First thought with mounting. I used a mounting bolt that was already there. Added a longer bolt though.
82c2103e6d67cd0b61c5887bb52cd5ef.jpg


If I had two I’d put them on the sides of hood as faux lights.
0c9e6a488ee1db65284ed6bdb98a6c35.jpg

0906f4107e50c639f541db6e44d0f308.jpg
 
Did it come from ACME?

1593372540412.png
 

ACME “WOLO”

These horns are about the same size of the “OLD” EA style. They would work visually on an old Motobike style bike. You might even be able to change out the face plates. That would be a good adventure for someone following this thread. I have an old non working one, might explore the faceplate sizes.
 
Last edited:
Temporary momentary horn button location. Battery pack is hanging from frame straight bar for now. Might get one of my cookie presses.
99a6374fef1e429105a150b6a1709ff4.jpg
 
Cleaned up the rear wheel. Experimenting with a few hardware pieces and vinegar. I also noticed that by just brushing on some vinegar on a few zinc coated parts the shine is dulled.
37c0f280d6cfc0636f5e3c437f765a3b.jpg

d4d54dd650724909b33b652749b71675.jpg

Garter Snake in the landscape...
74210b66d97fa9b9316b4463adc80625.jpg
 
Mounted the tire back up and put the rear wheel back on.
d8cf147004398ffb6f6a69fa266c694b.jpg

ffc9a75f9ff0d1c90361acb321c81f52.jpg

Did a little de-shining on the warning bracket, just subtle amount.
bd0c1e125bb1fcd639aff2d0f4595f17.jpg

I have a few other hardware parts soaking.
b554c7b0a6fe589408c73254fcbaef06.jpg

Think I’ll do a battery tube with ABS pipe. Horn wiring is temporary for now but active.
84bbc43e02ce58f259dd83cfecb02d9d.jpg

6badb67ba7d2e5d7c7c7abfea70178c2.jpg
 
 
I know it's late in the game but I saw this on youtube and thought something like this would be an amazing front end for your bike (play should start at 6:00 minutes):


Yes, the articulated removable front end is way cool. Think it’s beyond my skill set, but for a good price might buy one. Think it’s past the goodness of this pile of metal though.
 
f56907b4e4211ef1d98985dec68ff1e9.jpg

23f3f33198831eeb2de5c892c65643be.jpg

In keeping with July 4th...battery tube.
 
Last edited:

Latest posts

Back
Top