BO15 SteamRoller - Finished 1st THANKS!! - CompareTwinWinsVerBotenSteamRoller

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Just a few days of sitting in the shop left a light coating of flash humidity rust on the frame and parts. No worries, I still needed both the 140 and 220 hand sanding on the frame anyway.

You probably can't see it, here is the frame with the flash rust.

20200807_073606.jpg



Hand sanded the entire frame. I had thought about the paint scheme being Coppertone and Clear Raw Steel, but then I remember that I did paint and raw steel last year on Western Sizzler. I am going with Coppertone and Metallic Silver this year.

Here is the frame after the hand sanding and prep for primer in my urban paint booth. I used filler primer because that was the only gray primer I had on hand. Some spots on the frame will probably benefit from it anyway. I forgot to take a pic of the primed frame.

20200807_085032.jpg

20200807_090130.jpg



I had to go on a Home Depot run, so I picked up some regular automotive gray primer for the other parts.

20200807_162955.jpg
20200807_163632.jpg
20200807_164114.jpg
 
While I was out, the faux leather jacket was delivered at my office, so I swung over to get it. This is gonna be fun!!!! I love the color and aged vibe of this jacket.

20200807_155132.jpg



The stripes are the perfect scale for the seat. and the sleeve is more than enough material.

20200807_155147.jpg



I slid the nanner into the sleeve and did a very rough test fit. PERFECT!!!

20200807_155301.jpg


20200807_155242.jpg
20200807_155357.jpg
 
1596846331870.png
 
Cut one of the sleeves off of the jacket today and did a rough test fitting over the existing seat. This should work well.

seat2.jpg
seat4.jpg
seat3.jpg
seat1.jpg
 
YOU GET EXTRA POINTS FOR THOSE JERRY RIG SEAT CLAMPS!!

Sent from my LM-Q720 using Tapatalk
 
YOU GET EXTRA POINTS FOR THOSE JERRY RIG SEAT CLAMPS!!

I believe this is my first bicycle seat recover. I just picked up some of the big paper clips cuz I think I saw someone else use them. :D
 
Hit a few missed primer spots on the frame this morning.

20200808_092803.jpg
 
Finished taking apart the front forks and sanded them down for paint. I also still needed to seat the star nut into the threadless steer tube. I had never done this before, so I watched a youtube where a guy bolted a narrow deep well socket to the star nut and used it as a driver. It worked perfectly with just a few light whacks with the hammer. Used the ring on the socket as a depth gauge since this was right at 12mm which was close to what the norm is.

20200808_100958.jpg
20200808_101404.jpg
20200808_101607.jpg
 
Got the fork legs and rockers primed and hanging on my yard sale towel bars (which have been awesome for paint drying over many build offs).

20200808_121820.jpg
 
Road around to Target, Michaels, Joann Fabrics, and finally Walmart looking for the right high density padding to use for padding on the nanner. @Dr. Tankenstein had told me that he had used yoga mats before.

The first one I found was way to thin even though I could have layered it up.

20200808_134747.jpg



But I think this exercise mat from wally world will work just fine and still have plenty of mat left for my Pilates. :D

20200808_193617.jpg
 
Yup. Now I can upholster a banana. Thanks King!
I believe this is my first bicycle seat recover. I just picked up some of the big paper clips cuz I think I saw someone else use them. :D
And it's official: I can now take credit for inspiring the temporary seat cover attachment on this bike!
IMG_20200115_114940506.jpg
 
Yup. Now I can upholster a banana. Thanks King!

And it's official: I can now take credit for inspiring the temporary seat cover attachment on this bike!
View attachment 132659

I wish I could give you credit, but I've seen these clips used by many people for years :D
 
Road around to Target, Michaels, Joann Fabrics, and finally Walmart looking for the right high density padding to use for padding on the nanner. @Dr. Tankenstein had told me that he had used yoga mats before.

The first one I found was way to thin even though I could have layered it up.

View attachment 132549


But I think this exercise mat from wally world will work just fine and still have plenty of mat left for my Pilates. :D

View attachment 132550
If you have a carpet store close, carpet padding works great for seats. Able to be glued together and carved with an electric carving knife.
 
I USUALLY USE THE STADIUM SEAT CUSHIONS THAT ARE MADE OF FOAM. THEY ARE SUPER BOUNCY AND COMFORTABLE.

Sent from my LM-Q720 using Tapatalk

I almost got a couple of those until I found the mat.
 

Latest posts

Back
Top