Bonefish: The Beginnings

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Spent some time out there in the cold. Stripped a few parts off the Mongoose, collected a few others, arranged the other bikes for hibernation.
Here is what the Bonefish was wearing:
IMG_20211119_165352853.jpg
IMG_20211119_165323391.jpg

Certainly not up to my standards, but bolts and such may still come in handy. I can't believe how much the bars I took off weigh. Probably a couple pounds heavier than the Mongoose one.
Here's what the 'goose gave up:
IMG_20211119_165233397.jpg
IMG_20211119_165824158.jpg

It's all down in the basement shop now so I'll be able to get to it more frequently
 
Last edited:
It wasn't all smooth sailing. The rear brake wouldn't come out. Hit it with some rust buster. Then pelted with snow pellets. This is why I'm switching to the basement shop. I was literally freezing all afternoon.
IMG_20211119_115730401.jpg

The bolt is pretty corroded, but I think it will be fine. If not, I'll have to try to mix n match
IMG_20211119_165249787.jpg

Aluminum barrel adjuster on one brake lever was mangled, so I switched it, think it is steel now. Fits tighter than the other side, maybe I should switch both, but I like the alloy knurling better
IMG_20211119_120416078.jpg
IMG_20211119_120734035.jpg

And then there's the tires...
 
I wanted to see how it looks with the mags, so I put a tube and tire on the front. Wouldn't hold air. Switched tubes, and it took me 4 or 5 attempts to get the bead seated. Install, inflate, find out it is off the rails, deflate, reinstall, repeat. Finally got it to fit and sit, filled it to about 30 psi, stopped for the day. While watching a movie with the kids after dinner, a huge popping sound from the shop, and the second tube has exploded. I have strips in there, is there a mag rim technique I'm missing? Budget is so tight, even the expense of tubes needs to be considered.
 
Spent some time in the Rat Lab. Pieces came off, swapped some nuts n bolts
IMG_20211126_144118023.jpg

Pieces got cleaned. Rat salad: Vinegar for some rusty hardware, 3in1 oil for some others.
IMG_20211126_144406455.jpg

Pieces went on. Here's what I have:
IMG_20211126_144834414.jpg

Holding out on the tires. I'm hoping to find a tire for the back that's bigger than the 20x1.95 on the front. I want 3 of 3, bars, seat AND tires. Also still indecisive about rear brakes. I can't remove the v brake posts, they don't seem to be threaded in. Don't want to grind, I'm trying to keep original paint.
 
Now let's talk about the stickers.
IMG_20211126_145219662.jpg
Sort of a weird brag. They ain't that big. Delete.
IMG_20211126_145235002.jpg
Was there a 1.0? That would make the Bonefish number two. Delete
IMG_20211126_145257255.jpg

Double gusset? I count three. Delete.
IMG_20211126_145350984.jpg
IMBA? Don't have any ideas on what that means. Delete. The little fishey is a keeper.
IMG_20211126_145442208.jpg
Ditto. Keeper
IMG_20211126_145335969.jpg

Then there's this guy. Will attempt to remove, split it in two, and reapply as Bonefish on the top of the downtube once the paint has been cleaned up
 
Two things come to mind with the v brake posts - fender mounts and sissy bar mounts.
 
Spent a few hours down in the Rat Lab with Bonefish. Stripped it down to the cups. Everything was good, just dark dry grease. Previous owner was a girl who rode it to school and back, not much else, so no abuse. Until it met me.
IMG_20211203_125625623.jpg
found some more stickers to remove! This one has characters I don't know
IMG_20211203_125824667.jpg

The crank came right apart too. What do you see, a funky little fish?
IMG_20211203_130654387.jpg

Or a blank canvas?
IMG_20211203_130710218.jpg

Slapped it back together reversed, I'll put some artwork on there of my own.
Also peeled, sliced, diced, and reapplied Fishbone as Bonefish.
IMG_20211203_142942250.jpg
IMG_20211203_143009094.jpg

I wish I had taken more time, did more preparation. I had momentum and didn't want to lose my mojo. Cuts could be cleaner, application could be straighter. We'll see how the old glue holds up.
Also, now that the fork is off I can get measurements so I can contact my source, see what he's got for me. He specifically mentioned muscle bike parts as I was leaving last time
 
Last edited:
Following ParkRNDL and OddJob's discussion about dual brakes in PRNDL's Sears Spyder thread, I was struck with a terrible genius idea... Has anyone ever mounted two brakes on one bolt?
https://ratrodbikes.com/forum/threads/24-inch-sears.114917/page-2#post-1199493

Maybe if I got a really long bolt, I could mount one caliper on either side...
Maybe I gotta lay off the "wake-and-bake"
You'd have to use 2 separate pivot bolts locked to each other at the cross brace or even on top of each other via a coupling nut and lock nuts. Would require cutting down the bolt ends and threading the posts with a M6 die.
51Gmou7IkEL._SL1001_.jpg

Beautiful blue paint BTW... would go nicely with lime green.
 
Or you could run with the single idea, but on a single piece of threaded rod, locked on either side of the cross brace with a nut, with the brakes mounted on each end. I have thought about it, but never tried it out. The trick is finding a nicely matched pair where you are happy with the pull direction.
 
The rear brake hole isn't in a brake bridge, it runs through the extended top tube, which is thicker than a bridge.
IMG_20211126_145442208~2.jpg

I'm going to have to swap the bolt out from the front brake I removed from this bike to the Mongoose rear brake if I want it to fit. Those v brake posts are still present... I gotta find a fork so I can make some decisions
 
Also thought Denver Broncos..
Blorange is one of my favorite combos, back in the day I had a mad set of NY Knicks Cons...
vintage-shoes-cons-converse-knicks-collectors-new.jpg

Thinking about grips and pedals, maybe a pinstripe sticker kit. Who knows, perhaps the fork I eventually aquire will need a little bit of spraying too. That would be tricky, not going to be many days above freezing between now and then
 
Digging the blue/green (edit: I meant blue/orange) and blue/lime color palettes here. I'm thinking that if the muscle bike market had lasted through the '80s, we would have seen combos like that on new bikes.
 
Last edited:
Digging the blue/green and blue/lime color palettes here. I'm thinking that if the muscle bike market had lasted through the '80s, we would have seen combos like that on new bikes.
We actually did in the 1960s, the Sears Screamer and Murray Wildcats were 2 examples, as well as the AMF bike called "The Fast One". I have some photos and info, man they sure stood out in the ads.
 

Latest posts

Back
Top