Recent content by tjwilson

Help Support Rat Rod Bikes:

  1. tjwilson

    Riff Ratt

    Ahhhh, yup that would do the trick!
  2. tjwilson

    Riff Ratt

    I was looking at how you’re planning the pivot point of the rear suspension. I’m wondering if you’ll be able to get that close enough to the crank axis so that the distance between the crank axis and rear wheel axis doesn’t change (or changes only slightly) as the suspension moves. You’ll want...
  3. tjwilson

    SPACELINER PITMASTER SPECIAL

    Thank you sir, much appreciate. Yeah, the “slow” in “low and slow” on this is applying as much to the build speed as how fast the bike will actually be. Three months in and I basically just have a frame and a pile of parts . Would have been nice to wait for the build off to start but I suspected...
  4. tjwilson

    SPACELINER PITMASTER SPECIAL

    ADDITIONAL WELD DRESSING Time and motivation have been a little slim for this build lately. May let it rest for a bit but, I'll get back to it eventually and post progress as it comes.
  5. tjwilson

    SPACELINER PITMASTER SPECIAL

    Thanks. That Cadillac is really nice. Pretty excited that you made that connection.
  6. tjwilson

    SPACELINER PITMASTER SPECIAL

    FRAME WELD-UP I'm amazed when I see some of the images online of welds that professional welders can produce. True artistry. I think I've finally come to terms with the fact that my welds are never going to be able to even approach that type of quality. I can at least get two pieces of metal to...
  7. tjwilson

    SPACELINER PITMASTER SPECIAL

    Thanks for the compliments. Guess I need to check-in more often... closing in on a month to give this reply, yipes! I'm planning on fabricating the tank. I think I can get the front light bezel done in metal by squeezing and sectioning a piece of tubing. Not confident in my sheet metal...
  8. tjwilson

    SPACELINER PITMASTER SPECIAL

    MOCK UP 2.0 I made some paper & cardboard templates to be able to see everything that I was thinking of together before getting too far into actual building. This is the general direction I'm headed but I'm sure things will change as I go.
  9. tjwilson

    SPACELINER PITMASTER SPECIAL

    MOCK UP Time to pull the frame from the fixture and check how things are looking.
  10. tjwilson

    SPACELINER PITMASTER SPECIAL

    BOTTOM BRACKET On this design I have the bottom bracket pushed out in front of the main down tube. I started with a straight tube section tacked in place. Then to reinforce that connection I came up with a second piece that curved upward. After seeing it place I wasn't too sure and I might...
  11. tjwilson

    SPACELINER PITMASTER SPECIAL

    CHAIN STAYS I've been using the same "dies" that I used on Shortbow to make the "S" bends for the top and mid tubes and, now for the chain stays. Here's a link to that build with info on how the dies where originally made. Forget where I saw this but, running a file across the two tubes...
  12. tjwilson

    SPACELINER PITMASTER SPECIAL

    MID TUBES Used a template to locate the mid tubes relative to the head tube and worked my way back. I mocked up the mid tube main forward section and the pieces that bend around the rear tire. The best place to sleeve the two together ended up right near where the mid tubes get welded to...
  13. tjwilson

    SPACELINER PITMASTER SPECIAL

    Can you ever have too many clamps?
  14. tjwilson

    SPACELINER PITMASTER SPECIAL

    DROP OUTS (continued) The top ears of the dropouts needed a little angle adjustment to match the angle of the top tubes. I used some clamps and square tubing to improvise a metal brake. These need some additional finessing to close the gaps between the dropout and tubing and, the tubes...
  15. tjwilson

    SPACELINER PITMASTER SPECIAL

    DROP OUTS In addition to adjusting the initial dropout design to meet the top tubes I had to determine exactly how I wanted to hang the twin rear brake calipers. I'm planning on a rear rack so mounting one caliper at the top wasn't a real option. Plus, at the top I felt that it disrupted the...