Manfred's chop shop version of a cycle truck. Not yet named

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 2, 2012
Messages
24
Reaction score
0
Location
Pgh, pa 16001
Alright guys! I am a lurker here and have finally decided to step up to the plate.

The motivation behind this trike is my mother. After my father passed away my mom moved into a small house about a half a mile away.. Well I just fired her lawn boy so I need to fill in. And that's how I am justifying this build to the wife!

The rear end will be a surprise for now. But I am going rat rod in this. Here is the pipe fitting "adapter". I will tell you this will be a fixed gear 3 speed with reverse!
35c3328c7f563fdeebbca4aa65dc5989_zps162d5b1b.jpg


f40eddbf998f2b37b67564dad6f030e7_zps602c8b4a.jpg

69145abc4904518bda46ac0ef58a4096_zps065603a6.jpg


My loving wife is in nursing school and unfortunately build time and study time overlap by about 98% so construction has been coming in spurts.
 
a8c632bd8e58919b89b6dec9ebe3f837_zps26a996d3.jpg


So far I am about 6 solid hours into it at this point.
I am going to attempt a flat bed this week. I found some beat up sheet metal in the form of 55 gallon trash cans. Hopefully I can build a functional bed and keep it looking long and low.
 
This should be fun. I like the square tube frame.
Good luck
 
No I mean this will have 3 forward and one reverse while pedaling forward! I know every fixie need a reverse gear. It's a bonus when your building a heavy weight trike ;-)
 
94779c9ec88d878da5d50e36e4e723af_zpsa63c3b15.jpg


So skipping ahead a bit, I picked up a new chainring last night. Today I sandblasted the chrome off and started soaking it in vinegar.

This was my first attempt at bending the down tube last night. I later resorted to heat and my heavy rear end
e49f6b6fd2aa5091a18ad1b3f64ad68e_zpsd00484c9.jpg
 
So I am really striking out on the butt end of this thing. I whipped up a 26x32 flat deck.. Buts it's got no flow.. And it's boring. I want something low with the tires tucked up.. Gears are turning.. Thinking shopping cart....
 
Thanks guys. I did not need a sharp bend, just a nice flow. And I wanted it on edge. Heat did the trick.
I will let the cat out of the bag.....
1f482ed76eda62a855f5759235fa2929_zps7f2010d8.jpg


I told you guys it was a heavyweight!
 
Works a madhouse right now! I think I am trailering the beast to work on Friday to hopefully rough in the bed a little further.. I need to get some dedicated time on this thing :|
 
d1ca3a51f6f02c08b312f3e20e85ac16_zps11c38893.jpg


Got the bed roughed in. It will get old pallet boards for the deck. Those will sit on top of the angle iron.
When I say roughed in, I only took it this far to figure mounting locations and how much to trim for the tires.

So far I am still within budget. 0$
 
Welp. I finally got it out of the shop! I will get pictures up, its been very very slow in the making. It's slow, it's heavy, it's abosutely pointless! I love it
 

Latest posts

Back
Top