Billy Bob's " Phantom X " ( finished, off to take final photos )

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 21, 2013
Messages
211
Reaction score
427
20150620_125212.jpg
I decided this to enter this build off. A little late I know but I'm always buying bike parts, starting a build and get bored or it sits on the back butner and gets sold or parted out. Maybe if I enter this build I'll finish one. I came across a schwinn cantilever frame bike for sale local here in the boise idaho area that had a set of spinergy wheels on it. The bike had a rattle can rainbow sparkle paint job and a bunch of odd and end parts thrown on it . I thought the wheels looked kinda cool on the old frame and bougt it.
After thinking about it for a couple weeks I came to the conclusion that I want to mix a variety of styles and parts, mixing a little of the classic looks with some more modern day parts. I really like the looks of board track racers so maybe a little of that style as well. Hence the name of the build. Most of the stuff I build changes as I go, once I can step back and look at how things are turning out. It has to stay somewhat simple due to the fact I'm away from home during the week. This morning I stripped down the bike and started building and sanding parts when I realized that I had not yet taken any pictures. I put the parts on a work table and took some pictures. I'm using the cantilever schwinn frame, spinergy wheels, and a few odds and ends off the bike I purchased. The forks are aftermarket Columbia springer . I also want to use a smaller diameter crank sprocket so I picked up a 24" chain guard hoping it will be more proporsioned with the smaller crank. I'm not yet decided on color or small details like seat and bars yet.
Here is a pic of the parts. More pics to follow once I figure out if my picture loading skills worked.
 
Start of the build.
20150620_125136.jpg


I cut the stem off another pair of forks. The bottom portion was thicker that the top so I cut it in half and machined the lower portion to fit over the 1" threaded stem. Once I weld it the forks will be 1 1/8 threadless
20150620_125309.jpg


Also cut off the rear fender brace tabs.
20150620_125242.jpg
20150620_151926.jpg

Sanded most of the old paint off and did a quick mock up. I'll work more on it tomorrow
20150620_151027.jpg
20150620_151138.jpg
 
Welcome to RRB and it's great that you're jumping into the build off feet first.
I'm sure you'll be able to pull those interesting ingredients together for a tasteful build in the timeline.:thumbsup:
Who doesn't like a good smorasbord any how?
EDIT>
Whoa !!!!:13:
I was replying to your first post, when you hit us with those pics in your second.
This is looking real sweet already. Build on Billy Bob.
 
Last edited:
Great mix for your smorgasboard! The Swedish chef would be especially proud of your FORK FORK FORK
 
Thanks for all the comments and feedback. It's much appreciated.
I did work some more on it this morning. I'll post some more pictures in a little while.
 
Ya, they really are cool wheels - looked at some on Evil bay, are yours unusual? because I only see 4 spoke wheels for sale there.
They are the spinergy rev-x roks .. l don't know much about them, but like you I've only seen the 4 spoke ones until I came across these. I googled them to see what they were.
 
Here are some pics of what I did this morning. Figured I'd post a few more detailed pics that way people can see there is more to this build than simply bolting a bunch of parts together.

Got rid of the key hole in the forks.
20150621_071025.jpg

20150620_125328.jpg


The bottom bearing cup hit the forks so it needed to be clearanced.
20150621_072408.jpg
20150621_073638.jpg

Welded up the tube for the threadless stem. I drilled holes and plug welded them in multiple spots making sure to stay clear of where bearings would ride.
20150621_071559.jpg
20150621_072052.jpg


The upper spring mount on the forks had to be modified to fit the 1 1/8 tube and rebent to fit the length of the head tube. I also concaved the bottom of the stem to clear the top nut of the spring which allowed me not to use a stem spacer. That way the bars can be lower and I think it looks better.
20150621_081144.jpg
20150621_083508.jpg
20150621_090234.jpg


The cranks had a sprocket guard that i removed. I wanted to use just the sprocket without the guard due to using the 24" schwinn chain guard. The bolt/nuts for the sprocket had to be made shorter. I also cut the mounts off the chain guard and rebuilt them to sit lower and fit tighter around the sprocket. The rear of the guard had to be clearanced to fit the rear sprocket.
20150621_091753.jpg
20150621_091207.jpg
20150621_091511.jpg
20150621_092904.jpg
20150621_103858.jpg
20150621_112208.jpg
20150621_112220.jpg


I won't be using front fender braces so I cut the studs off of the stainless bolts on the bottom of the forks. I then put them in a drill and used sand paper to give the heads a spun look.
20150621_084844.jpg
20150621_085210.jpg
20150621_090135.jpg


And that is it until next weekend. Here's wherei t sits as of now...
20150621_112347.jpg
 
Great work going on here so far.The wheels sets it apart from a normal bike...
 
Start of the build. View attachment 11232

I cut the stem off another pair of forks. The bottom portion was thicker that the top so I cut it in half and machined the lower portion to fit over the 1" threaded stem. Once I weld it the forks will be 1 1/8 threadless View attachment 11234

Also cut off the rear fender brace tabs.View attachment 11235View attachment 11236
Sanded most of the old paint off and did a quick mock up. I'll work more on it tomorrow View attachment 11237View attachment 11238
This is my kind of bike.


- by Gigmata
 
Wonderful attention to details on this one!!
Keep it up.
Love those Columbia springers. That may be the first threadless version.
 

Latest posts

Back
Top