DNR Kit Tool

[RustySprockets]

A handlebar alignment gauge for the really, REALLY picky!

https://www.dnrdesignsllp.com

 

[horsefarmer]

Wow! $190. That's my bike budget for the whole year.

 

[bunnyman666]

Wow! $190. That's my bike budget for the whole year.

A straight edge with a t on it would suffice. There is a T that is used in T-shirt printing that would suffice, and it’s only $39.99 USD.

 

[RustySprockets]

A straight edge with a t on it would suffice. There is a T that is used in T-shirt printing that would suffice, and it’s only $39.99 USD.

My "T-square" consists of a 89¢ wooden yardstick with about six inches lopped off one end and glued back, perpendicular to the spine. It's been plenty large enough and sufficiently accurate.

 

[bunnyman666]

My "T-square" consists of a 89¢ wooden yardstick with about six inches lopped off one end and glued back, perpendicular to the spine. It's been plenty large enough and sufficiently accurate.

I already had mine LOL The T slides. Essential for printing T shirts!

 

[Retro Flutter]

I just close one eye and line it up to the crown of the fork. Usually close enough.

 

[bunnyman666]

I just close one eye and line it up to the crown of the fork. Usually close enough.

And this way costs you nothing

 

[MattiThundrrr]

A person must be absolutely certain that their arms are both exactly the same length to justify spending that coin to ensure the bars are centred. I need to get the DNR Arm Measurement tool before I get the Bike Alignment tool