Gravel Grinder Green Motobike 1930

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Finally stopped raining for a while when I had some spare time. I got the bike out for a shakedown cruise.
321bce5c111f7a6f6b996a7fb0a1d5e4.jpg
40fd0d7c79c7b7255b48978616cc9f79.jpg
dea4d172f4ecf52eea5687ced6ce7d7d.jpg
0680b8193d3c48895a5e29a8efd91c4e.jpg

Wow, the bars had too much drop for me and the size and geometry of the frame.
So I flipped the bars over and they worked well. I have two sets that are similar one with 3” rise and the one mounted with 4.5” rise. I switched out for the 3” rise set which worked better but then I flipped them upright which is where I’m at for now. I still want to use bars with some drop...just need to find them.
7b46693a9381d49e86a48887d0302a7e.jpg
8fc954fb9c311ec6f4b78d66065235f8.jpg
0c315b0a9db064fecc7d9471c0f95b98.jpg

This may end up more of a gravel cruiser than gravel grinder.

Sent from my iPhone using Tapatalk
 
I have an old 1950s Columbia cruiser converted to a gravel bike with 700c wheels. It's single speed and I use 38 x 24 gearing which sounds low, and it is at first, but if you are on a 100K gravel event then you will be glad for this gearing, unless you are a fit young rider. I can ride a lot of single track with this gearing but you have to stand and attack. For the Ore to Shore mountain bike race I used 28 x 20 but that has hills. The O to S was ridden on a 1938 Colson based Klunker single speed. Most single speed mountain bike riders use 32 x 16 with 29 wheels. Try 32 x 16 or 36 and try different cogs (36 x 16 might be the sweet spot for a gravel clunker?). We have moderate hills in town and a lot of people convert their vintage cruisers to a 36 tooth front canning and use whatever came on the rear. The 24 tooth freewheel came from China and was like $5. It makes a clunk but has lasted about 4 years so far. The disadvantage is that there is really no way to get these cheap single speed freewheels easily off as they have dimples for tool placement, not slots like the Shimano. Problem is I could only find big cogs as cheap Chinese bits. To get it off you can destroy the cog by prying off the cover plate or by tack welding the freewheel to the gear. I have spares in case it blows but so far so good. I kept busting chains standing on steep hills. I finally went with a double step riveted 7 speed chain, which may or may not fit your gears, might be too narrow. You might have to use a spider and multi speed chain ring. This chain has not broken. I kept getting pinch flats on single track, despite Stan's Sealant in the tubes. 40 psi or more solved that problem with the 40 mm gravel tires. It's very hard to ride sand with 700c x 40 mm tires with 40 psi in them but not impossible if it's fairly flat and you bust a gut. Hope this helps. Im old, in my 70s, and my leg strength is way down but if you have gearing laying around somewhere in this range it would be a good place to start. Try 36 x 16 that might work for almost everything gravel. You'll spin out but you can also climb, choices.
Thanks for your experience input. I’m in 70’s also, guess that’s why I like the old stuff. Starting to think this bike May be more of a gravel cruiser than a gravel grinder. Never planned to race it just want to ride some of the country roads I used to ride with my mountain bikes 20 years ago.
Right now I have a 44 x 22 drive train setup. It felt good on the pavement this morning. It’s a one piece crank at present, I have a three piece 36T crank available. The rear hub is a coaster brake type.
I do appreciate the old ways and early technology, it’s just cool that some of this old stuff has survived all these years. We have a ride in this area called the Dirty Kanza in the spring, various lengths unsupported. Years back we had a ride in August that took place in the same Flint Hills called “The Death Ride”. It was basically a 100K ride, and it was a killer ride. Not a race but bragging rights for time to complete. I did it 5 times, completed 4 and bonked out once.


Sent from my iPhone using Tapatalk
 
Last edited:
Looking forward to hear how this compares to the Preston for you.
The geometry of the Preston is better suited to my build and size. With the beefier tires it feels more stable at this point.


Sent from my iPhone using Tapatalk
 
Went to LBS and we found a vertically longer used PUCH 60mm stem. The shop has been around since ‘63. This allows for more rise at bar mount so I flipped the 3” rise Wald bars back over. No test ride yet, but hopefully this will help the geometry be better suited to my old body. Also allows for more lamp bracket adjustment.
7fe96a00575db64bfccc4f2a58fd9e07.jpg
b90db0f11c7e95325d9d165ce85107f5.jpg
7b0d216dffb30f2fe4cc77a6129fe7a5.jpg
cbdbb4dea3dc041622f18adf4e2aabad.jpg



Sent from my iPhone using Tapatalk
 
Added grips today, adjusted saddle position, greased stem and adjusted, added bell and rechecked tightness of parts. Several test rides and more adjustments. It rides nice getting close to Preston but frame still smaller.
The GravelKing tires seem to have less rolling resistance than the Riddlers I have on my BO#14 Motobike even though it’s heavier.
c78a9e613a245d8373878b7490b0131d.jpg
23508326d1a3bcad2c29f501e5236d62.jpg
0c6547dbdafc9d970e0cc29b2f08f6c0.jpg
06025a7edcd7a3ccbe6a94a12434cfbc.jpg
c1e5f739beaf8202835cb7b3ddb7611c.jpg
0a8efb3ebd3c9e40a5ec5c19605e54f3.jpg
c0123962bf001ce14eab26275809ac67.jpg
c1e64d53cce332696b897c1b5ee95453.jpg
581f054860592c0462e8c10db4fc77fe.jpg



Sent from my iPhone using Tapatalk
 
Nice changes!
Maybe get a laidback seatpost to compensate for the frame length? Nothing drastic, just a vintage post turned ‘backwards’ to get you a couple of inches


Sent from my iPhone using Tapatalk
Thanks!
That’s probably a good idea. Not sure how easy it will be to remove the straight one though it went in tight.
This Motobike is still a work in progress. I have a period rear rack for it, just haven’t got around to trying it out. Playing with lamp to LED ideas.


Sent from my iPhone using Tapatalk
 
I played around with several LED ideas for the carbide lamp. I don’t want to alter the lamp at this point. Also not sure if I want to clean up the nickel.
I finally seized on a simple solution, maybe temporary. I had some of the old Bell flashers that Walmart sold. The molded straps had broken so I cut them off.
6350432e09501abeb8f51b1d6402fe35.plist
aa49926418d2ba105582b7f5493b2745.jpg
187969722e720ba41c253ee363e594ae.plist

Temporarily used some Gorilla tape to stick them in the back of lamp. The lighting illusion seems to work OK. Need a better removable attachment.
2df0549b8f339cbcb7423cdf93de7846.jpg
826a7383c9b87e100e961dc55c2b40df.plist
4591f85aeda6bab84b7bbc4b90fb6ef5.plist
6534c7b3c87a572cb95e76f7a11e83fb.plist



Sent from my iPhone using Tapatalk
 
Last edited:
Added a period rack in keeping with age of bike.
7b2d364e9cab4512853ba0d226831337.jpg
ded4d011c23ed280702ef39a20466a92.jpg
50596724aaf72ea8be69ea7299c156d2.jpg
1d9893130c7cf5d92eb28cd3563a9899.jpg



Sent from my iPhone using Tapatalk
 
28” wheel-set and 700c tires.
7d2efa7ac053aeeeca655c0d9d024dba.jpg
80ca977e26da10ffd374e2d157e141b9.jpg
122fe5c7c8406fefbc85725201c1e475.plist



Sent from my iPhone using Tapatalk
 
Have the Panaracers seen any dirt/gravel yet? Is that green rubber sticky on pavement? I'm curious how they perform.
They roll smooth on pavement, I’m not sensing the resistance that I somewhat expected. May get a chance for some gravel in the coming week.


Sent from my iPad using Tapatalk
 
I have those same tires on a utility-type bike and they have plenty of grip for that use.
 
I have those same tires on a utility-type bike and they have plenty of grip for that use.
Got out for some distance today about a mile on freshly graded gravel road, 4.5 overall. The street around my neighborhood are also decomposing asphalt...some areas like gravel. The bike and tires rode well, just some squirming around in some of the loose stuff. Hard pack sections worked fine.
9f2812df9436c21276e231922160d48d.jpg
eedaefa4677142161ceaab0e08d0d311.jpg

Rode a variety of surfaces. Still a bit to much bar drop for my liking.
8b01070f1aba736cc06ab0fc144fa443.jpg
24115dc8e9968583984b827453c7e2e6.jpg



Sent from my iPhone using Tapatalk
 
Last edited:
Before the gravel test I added my reflector signature to the rack.
82215e35527c9c0b0f1071c0019c3ca8.jpg

954ad31993e636585c5927790e3a0628.jpg
516648fc2f9189edfd83d7dfadcfcd4e.jpg
a9d5fabdb4f3c8010f29233c62761208.jpg
99cee30110c8c12cd68c8e8130a2eb83.jpg



Sent from my iPhone using Tapatalk
 
Added a double leg stand.
134684c424bd52fcb8186df03dc57162.jpg
c2422a4de71cf21b72e9cfc782bc405e.jpg
441401d82edf6094dcfaf9cf948a8e6e.jpg



Sent from my iPad using Tapatalk
 
Changed out the bars to a Velo Orange Postino zero rise set. I’d still like more back sweep but these may fit the bill. The pair I want are on eBay but for some reason the seller won’t let me buy them. Member for years, no negative feedback, 100% feedback, no issues, have bought and sold and they won’t tell me why they won’t sell to me.
The grips were hard to remove and reinstall. It rides good, may raise the seat an inch or so.
bdac9e4fedfb88afee9eddadc4680f83.jpg
e748fa3fd76d7f2d0917b4dff69e8e7f.jpg
b0176919009dd841897a63ac728a698f.jpg
c62aaac8e1f2404521dee930a2cef663.jpg
016beb7fcd5988ff97ebda8fa4891cf3.jpg



Sent from my iPhone using Tapatalk
 
Details...
b15c7948f91771ecb1097ee285853053.jpg
548dd37e91ee34607775a46a149c0899.jpg
ea129e006693d93f367e485f754dd771.jpg
37405e42cd4732107ecc96c11dba44e2.jpg
6c93bf23e6a78dee234fcfc832cc6cfe.jpg
2ded86870ce9edfed73c4f9304a985e9.jpg
7470f7d6e4912a8a68537fea21bfd349.jpg
8694f9e47b0978d6c943e5d85356f21c.jpg



Sent from my iPhone using Tapatalk
 
Out and about this morning, smooth rider, really liking the tires.
6fa5124c1b936a5175bae81e7b0f7b66.jpg

7be778269e696085ac09f10fd4323b23.jpg

3169f99a9a1e1ae83ebeb70beac77f4f.jpg



Sent from my iPhone using Tapatalk
 
Last edited:

Latest posts

Back
Top