MBBO Class 2- ALUMINIUMIZING

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Finally got to work on this again today for a little bit...
Used a piece of 3/4” square aluminum tubing to replace the shock and drop from the original mountain bike stance.
12fcf0590482045fa9dfb2aa95544f9e.jpg

Used the original shock mounting bolts to fasten it into position between the front triangle and the rear swing arm.
a039508efd86328482141d0e8169feb5.jpg

No more rear suspension now.
Also noticed that the rear swing arm has developed a few light rust spots. Apparently it is not aluminum as I previously had thought, lol
6b9ad86d97c5708966bfe799c493ab30.jpg

I do have a plan in mind to deal with the non-aluminum issue that will also satisfy my “roadie-at-heart”.
[emoji12]


Sent from my iPhone using Tapatalk
 
Starting working on the fork today. Cut up the bent suspension fork I’ve been featuring in all the previous photos.
faebfbdb4182067816eb6faaddcba68d.jpg

Welded the fork legs onto each end of a piece of 1”tubing.
c7e0ede244bb311284397df071bb5ac5.jpg
600603458c7764ef2173fd406bb7fc67.jpg



Sent from my iPhone using Tapatalk
 
Troy, this is really cool! I can't wait to see a comparison of the original vs the custom muscle machine you are creating. :thumbsup:
 
super cool :thumbsup:
 
Able to make some progress today.
1b46461aa728e490b021d3625e04a4c5.jpg
Headset installed and it fits. [emoji106]

3ef629c31bdddccc7a7638931936e574.jpg
Bottom bracket all greased up and installed.
40f282f63dd27130924c8ca8cd39e4d1.jpg
Crankset added.
f6ac51b1a8242b351ee70372694eec78.jpg
Popped the seat on it as well.



Sent from my iPhone using Tapatalk
 
Was given this sissy bar. It’s almost 8” wide. Not sure what kind of bike it is from. I need to narrow it down to 5.5” and don’t want to cut it so I’ll put some fancy bends into it I guess.
1e34e8a2cc002b8316bc27f6eb398a2a.jpg



Sent from my iPhone using Tapatalk
 
Was able to mount the sissy bar without having to bend it at all. A length of 1/4” threaded rod and some aluminum tubing to cover it tied the bar and seat together.
e7df9b5ea1cb0be5944d346d994f3436.jpg
d650806b77c1b6ae6bb8df529032d316.jpg



Sent from my iPhone using Tapatalk
 

Latest posts

Back
Top