Monark II fork problem. Hopefully solving with Plasti Dip

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 11, 2012
Messages
286
Reaction score
227
Location
Livermore, CA
Rating - 0%
0   0   0
So I got these Monark II forks for my daughter's bike. The frame she has is a postwar DX that I lovingly painted pink and black for her. Then I put on the Monark II forks, and while it wasn't the best handling bike in the world, it sure looks cool.

Well, fast forward a bit, and her bike fell over in the garage, and the giant steel blade that they call a "top bracket" dug into the pink paint. Needless to say I was ticked off. This is what the slayer of paint looks like.

top_black.jpg


The edges are sharp enough to slice cheese. I figured there were two ways to deal with it - either grind it down and repaint it, or I could lay down thick coating of Plasti Dip. It's laying down quite well - which was a bit surprising. I'm about seven coats in, and it's starting to build up nicely. Once I put a few more coats on, I will post a pic. Hoping this solves the problem for me...
 
I put a piece of velcro around the frame on springer bikes to protect the paint, and hide the scratch....
 
Well, after many, many coats of PlastiDip, I officially called it good.

1622815_10152192128544728_2058604857_n.jpg


The PlastiDip is pretty cool stuff. It went on pretty smoothly, and kinda leveled itself out between coats. You can't really tell it's not paint. I tested it against a frame I didn't care about, and it seemed to hold up and didn't chip the paint.

1235261_10152192128504728_528488521_n.jpg


It reinstalled easily, too. and now "Pinkie" is a roller.

1607093_10152192128479728_298286697_n.jpg
 

Latest posts

Back
Top