Rockin' Rollfast - Finally a Video!

Sep 14, 2013
6,272
13,086
60
Bradley Illinoiz
www.instagram.com
Looking forward to seeing how you stretch that frame.
RFbt.jpg

Well the stays are toasted so they gotta go...
Probably going to use the rear clip from another bike, and run the seat post parallel with the existing tube, put a good 4 or 5 inches between them. Maybe a plate at the dropouts for a few more inches, like I did on Little Neutrino...
I've got a few ideas in my head, a radical tank plan and a rack of sorts...
It's time for the Guitarl to shine thru a build.

Carl. :rockout:
 
Last edited:
Sep 14, 2013
6,272
13,086
60
Bradley Illinoiz
www.instagram.com
DSC00928.JPG

I'm not cutting that old frame just yet...
but I think you'll get the idea...
RFbtV2.jpg

I'm thinkin' of fabbing some vertical plates to weld in between the BB's,
with something similar at the top. Looks like I'll probably need to raise the front half a bit.
I want to keep the seat tubes parallel and have the top tube flow into the seat stays,
3 pc. crank is going into the front BB, seat post into the rear tube.
Looks like I can get the seat stays and the straight down tube about parallel too!

Carl. :rockout:
 
Last edited: