Show me yer Layback seatpost

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Does this count :21:
1593613926960.jpg
IMG_20200901_185156298~2.jpg
 
Here is another monster laidback boomerang post that I used from @slowriderz

laidback3.jpg
laidback4.jpg
 
Up first is the old stem (gooseneck) that magically fit the hole on my Monark Thunderbird. It's minimum insertion point is in lower than the original post that came with the bike. The seat clamp bolt goes through a piece of pipe that's shimmed and fit inside a bigger piece of pipe that is clamped in where the handlebars would normally be clamped.
IMG_20190810_191501.jpg


Next is a custom made piece by Chad at Chop Shop Customs. I measured the angle of the seat tube to get the layback portion as close to level as possible.
IMG_20190907_105954.jpg


And here's one I got off eBay, supposedly for motorized bicycles. It's similar to Cap'n Awesome's but with a bit of a gusset.
20201005_183517.jpg
 

Latest posts

Back
Top