Show us your Ruff Cycles builds

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 18, 2012
Messages
577
Reaction score
92
Location
San Diego, CA
Rating - 100%
3   0   0
Here's a thread to show off your Ruff Cycles builds. Reply with your pictures and links to your build threads if you have one.

Here's mine...

I recently put together a Ruff Cycles Porucho. It's not totally finished but got it where I could ride it to make sure all the parts work and to try it out for fit. Here's what it has on it so far:

  • Ruff Cycles Porucho frame
  • Sunlite Deluxe Springer 1" threaded fork (used adapters to fit 1 1/8" headtube)
  • Felt 24"x50mm gold wheels, 12g spokes
  • Sturmey Archer front hub with drum brake
  • Nexus 8 speed rear hub with roller brake
  • Felt cream Thick Brick 24x3 tires
  • 1-piece crankset with Electra Sweetheart chainring
  • Shimano NX-01 oval link chain
  • Nuvo kickstand
  • Project 346 Basman handlebars
  • Brooks grips
  • Crane Suzu brass bell
  • Shimano hand brake levers with 8-speed thumb shifter
  • Brooks B33 saddle
It just has red oxide primer on it but planning to build a tank and fit fenders and then have the frame, tank, fenders, fork powder coated maroon similar to that used on the Felt Deep 6.

porucho049.jpg


porucho050.jpg


porucho051.jpg


porucho053.jpg


porucho054.jpg


porucho057.jpg


porucho058.jpg


porucho060.jpg


porucho061.jpg


porucho062.jpg


Here are the wheels. I started out with a pair of Felt Hot Wheels hoops that had never been laced. I knew I had to build something around them.

wheels02.jpg


wheels03.jpg
 
Last edited:
 
Last edited:
This is my new Ruff Cycles Tango S Special

Frame: Ruff Cycles Tango S V2
Fork: Felt
Wheels: 26 x 3 Front and 26 x 4 in the back, Schwalbe Big Apple Tires 26 x 2.35, Sram S7
Crankset: Redline 160mm

10511243_804583969575358_8786125763214216141_n.jpg

10538469_804583999575355_1175629187604335601_n.jpg
 
ruff_cycles_tango_01_by_lazonaimagery-d81rcik.jpg


ruff_cycles_tango_02_by_lazonaimagery-d81rcq3.jpg


Ruff Cycles Tango S v.10
Project 346 Balloon Tires 26 x 2.35 stretched
26 x 4 inch rims from a Mongoose Beast
Fork and stem also from Mongoose Beast.
Sram Automatix Coaster Hub

This was the first bike I've ever built. I had to re-lace the rear wheel because I needed to change the hub. The stock hub from the Mongoose Beast does not fit because it is too wide. Spray can paint job, satin baby blue. I forgot to clear coat it before assembling to bike DOH! I might strip it in a few weeks anyhow and go for a bare metal look.

I am sort of disappointed with the front fork. As you can see, there is major wheel gap between the wheel and the top of the fork.
 
Last edited:

Latest posts

Back
Top