Cadillac

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Looks great! Keep plugging away at it.
If I didn't work on my build on hot and humid days, I would only have about 7 days available to do work during the build off. :D :D :D
 
Stopped at the hardware store Friday after work, got these button head Allen bolts that mostly disappear
3A4F532B-FF03-446C-BF4F-1995F6F74D30.jpeg
I had soaked the rusty reflector in wood bleach and was gonna replace the broken lens with part of this bigger one when I found a much cleaner one in a pile
AA1F8F33-8F5D-45DC-B347-35A0EDD935E4.jpeg
so I used that one instead
959E62FF-DB7D-4F1D-83CE-E5D21F297F9D.jpeg
had to assemble with the wheels to make sure nothing rubbed, I need to notch the rear fender for chain clearance but everything else fits!
ECDB73D9-0C87-4B30-888B-492D61ECCDF2.jpeg
5D52B81C-6FDE-4341-939E-DC5AF88CD0D8.jpeg
 
Started with a hole to have a smooth corner, then chopped and sanded with the dremel
991D41BB-ACF5-4AE6-BB20-144F900A1F1A.jpeg
since I procrastinated my way through July and most of August I didn’t get this light to work but I stuck it on here anyway cuz it looks cool
55A7EC4F-085B-4623-A94D-6213EE6F0B16.jpeg
the guy I bought the frame from said the rack was original to the bike, and the swap meet chain guard is from a Shelby so they both fit wit no issues
AEDEF00B-4D6A-4D6B-BDD5-C9BE4A0E0DC9.jpeg
0234B3A9-5A61-4613-BBDB-F38BAAB6C8AD.jpeg
and I’m really happy with the way the curve of the fenders follows the curve of the whitewalls. I don’t use whitewalls a lot but I figured they were appropriate for an old Cadillac 😁 the wheels are from felt back when you could still buy them, with a skip tooth cog from memory lane. The tires are duro that didn’t fit good under the fenders of my flightliner. I might actually have enough time left to finish this thing….
6F19AE8A-5CBC-46A9-B36B-7EF94270A34B.jpeg
it will be a bit simpler than I intended but should still be a cool bike 🚴
05AB4357-69FE-4D0F-A9C1-EB8FA2ECD5F8.jpeg
 
Some people have a knack for putting a bike together so everything 'fits'. You are definitely one of those!

Diggin' it Schultzie!
 
Everything is flowing so well with this build!
 
The only time consuming thing I have left to do is the pedals, these are the only “old” ones I have and they’re really rusty and crunchy
E4F79A58-F433-4761-A8AF-2723E3DDCB76.jpeg
they did come apart with only a little bit of resistance so into the wood bleach they go, I will need to replace the bearings
34347ED9-BC9C-4C28-8FE0-6713CBD7201A.jpeg
A0C75B2C-F664-4539-B043-53CE2E7B9B06.jpeg
while they soak I’ll take care of a couple easy things, this cool kickstand came off a bike I bought for parts a few years ago, looks like it belongs here
7BC8719E-5F5D-45EC-A3B1-4C00EDBA8696.jpeg
a nutcracker stem, some not too shiny cruiser bars and what I believe are era-correct grips
38A21139-427A-4CCE-BBB7-9BEF9E362701.jpeg
892B75BC-3789-4DE4-BEEB-0EE37DA171EA.jpeg
and here’s what I’ve got now
94C913E1-8AA1-4F4A-A0DB-2B6C2EA42D4D.jpeg
 
This cake you are baking is turning out well.

Can't wait for the 'cherry on top' to quote @Jude Ephesus ....the saddle.

I don't remember if we got a preview of it before?
I really don't have a great choice for that, all the seats in my parts pile are from newer bikes. I'm either gonna swipe the seat off my old Elgin mutt build off bike from a few years ago or more likely just use a swap meet brooks off a british bike just cuz i got a good one cheap.
0221806D-1181-4D0E-A209-0BD61698F559.jpeg
 
This is the seat I’ll probably use, got a seat post for either choice
C04A3149-3897-43A9-8D4F-1A32F14B34E9.jpeg
B7A5D844-F2C9-4076-9AEF-260C9BC40415.jpeg
i took the pedals out of the wood bleach bucket started the process of wire brushing, straightening and spraying parts with rust preventer
A9AEA508-37ED-4CB4-BAEB-CB83039D066E.jpeg
3C34FAC2-D105-4D5C-86BE-3D8E0928CD52.jpeg
next I need to search the bearing bag or go back to the hardware store to get 3/16” bearings, stay tuned…
8E73CBB5-C0AF-4E52-AA8D-40E05BD05CBD.jpeg
 
Can't go wrong with the Brooksie! Pedal guts are looking good.
 
Well I need 28 bearings for these pedals and my hardware store had 16, so I dug through the bearing bag and found some more.
5AC8BDB9-3EFF-4B98-948A-C5FDF01A129E.jpeg
The rest of the pedal parts got cleaned and sprayed. I was going to use these new pedal blocks but decided to scrub the original ones with some dish soap and a toothbrush and I’ll use those instead, goes better with the other old parts
B532FFB9-F0C3-4FF9-B0A1-A3CDE6581100.jpeg
1A728ECD-7476-4C44-965B-404D0AD39D34.jpeg
while the rust preventer is drying, I tried the seat off the Elgin on this bike, and I like it way better, it’s gonna stay. I’ll probably put the Brooks on the Elgin when I bring it back in the shop to mount the drop stand I never put on when I built it
ADBFB366-C11F-484C-BFA8-B9390A2BFC64.jpeg
today’s progress
6CB01D48-F98E-43C5-AB6E-B0452639A6C7.jpeg
 
Out of the bucket, light scrub with some steel wool then a good rinse and they look like this View attachment 198319colors and pinstripes look good but they’re still scruffy enough for my bike 😁 just gotta hammer out a crease and a few dents, rivet them to the braces and make the whole contraption fit the bike ….
I learn more tricks on this site. Someone should put together a DIY manual on how to use chemicals on bike parts for which they were never intended. Gonna try this on fender set I just received. Great info Thx
 
finished pedal with new grease and bearings
24FF709A-E641-4C32-A6D6-50D1A79A641B.jpeg
and,as mandated by New England Rat Rod Bikes regulations, a beverage opening device from one of our local breweries
257F3876-2F6F-4053-B079-2E795A6C506F.jpeg
so pending a test ride and final adjustments, I’m calling this one done! Not exactly what I had planned, but I only actually worked on it for a couple weeks so I’m happy with it. Been a pleasure building bikes with you guys again 😁
AEC2F6C4-1B48-4A6C-9D28-6BF8E48F1F49.jpeg
 
Sweet fat ride man! It all came together great!!
 
As I said befiore in this thread, you have an 'eye' for what 'looks good' with rat rod bikes. Another nice build for your stable!
 

Latest posts

Back
Top