⬡⬣⬡⬣⬡ HEXtreme ⬡⬣⬡⬣⬡ --- Sexy HEXy Is DONE! - Ride (PIC HEAVY) + Walkaround VIDEO!!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Finally, the entire frame has been covered with the cleaning process down to 1000 grit simple green wetsand.

20210508_155947.jpg
20210508_155958.jpg
20210508_160013.jpg
20210508_160024.jpg
 
The lighting in the courtyard wasn't doing the Duralium justice, so I went out in the lane to catch some rays.

20210508_160322.jpg
20210508_160624.jpg
20210508_160636.jpg
20210508_160647.jpg
20210508_160731.jpg
20210508_160737.jpg
20210508_160746.jpg
 
When I saw that first pic I thought for a moment those black marks on the upper seat stay were holes. :oops:
Guess I better lay off the Champipple. :crazy:
 
  • Like
Reactions: KJV
There's always the ol' Cream of Tartar sauce method of polishing aluminum too. I used that on the Fisher CR7 build back in BO #13. Wow. Just saying that makes it seem so long ago!
 
There will be some level of polish, just not sure if it will be to the same shine as SaltHammer was.

index.php
 
⬡⬣⬡⬣⬡ HEXtreme ⬡⬣⬡⬣⬡


I'm in again. This will be my 11th Build Off build. So far I've finished 1st (twice), 2nd, 3rd(twice), 4th, 5th, 6th, 7th, and 26th; I was shooting for 8th place this year, but this year I'm shooting for 11th!!!

View attachment 155659


I don't know if I can crank it one louder like Nigel Tufnel , but I hope that I can take my Monark Silver King Hextube to the HEXtreme.


Here is a pic of the frame when I got it back in 2018. It's been sitting in my office since then.

View attachment 155660


I scored some killer McFly billet Iron Cross wheels last year and hope to be able to use them on HEXtreme.

Here they are with my RRB Model Bash Up

View attachment 155661



That's all I have for tonight. I brought the frame and wheels home Friday and will start brainstorming and working on the bike today after I wake up.
I'm ready to have another fun year with my build brothers and sisters. As always, it's sure to be a blast!!!
Those look like some real sweet wheels
 
I've never used any special tools to install BB bearing cups other than a hammer and occasionally a block of wood. I really didn't want blows to shock this cast Duralium BB, so I went to Home Depot last night.

20210515_103900.jpg


20210515_103944.jpg


20210515_104341.jpg





My bearing cup press didn't work perfectly, but combined with my old methods it did the trick with minimal impact on the BB. The only problem was allignment. The press on its own didn't force allignment of the cups. So I had to remove the press a couple of times, and use the buffer wood and hammer to provide some adjustment whacks. In the end these were lesser blows and the press pulled the cups in cleanly.

I think the Lawless billet aluminum bearing cups look awesome in the frame. Shiny is good. Don't be whiny about the shiny. ;)



20210515_110203.jpg
20210515_110439.jpg
20210515_110529.jpg
 
Last edited:

Latest posts

Back
Top