'53 Bel Airflow Shelby: The 7th Annual OddJob Awards! Pg 22!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I LOVE that idea for the back end! Barb wanted to rename it, but her suggestion was kind of a boring, "Cruisin'" . I had all kinds of 'Loony Toons' ideas, she can't go for that, no-o-o-o-o, no can do. I guess since she bought the boat I can't throw her overboard; I mean 'overthrow' her. :wondering: :bigsmile:
That's why I'm building a mini boat, only big enough for one.
 
So, I met one of my main goals on this build. That was to get the chain guard on the bike, and affixed so that the bike functioned well with the guard in place. I'm very happy with that result! Stay tuned for more 'doo dads' to be added along the '53 Bel Airflow theme.

In the meantime, I have been working on upgrading / modifying / rat rodding our mini pontoon; the Mitey Toon 13' all electric pontoon. It came with the Minnkota 55 lb thrust trolling motor, and two 12 v batteries (for a combined 24 v power source). On a quiet morning or evening, with no wake and little boat traffic, it was perfect. But if you got 4 people on the boat, or the water was wavy at all, it just didn't cut the mustard.

After about 2 yrs of research, which is like an eternity for 'OC ' OJ, I decided to try some new technology; the propane powered outboard motor. This is made by Tohatsu, who makes all the Mercury motors that are 30 hp or less. As with everything these days, the supply is very limited. Add to that the fact that I needed an UL (ultra long) 25" shaft on my motor to achieve the best performance, and I ended up getting 1 of 3 of these motors currently available through the main distributor in Texas. My guy Barry who owns his own business right in the middle of the north woods in Wisconsin, located in a large pole barn on his property, set me up. I love doing business with a REALLY small businessman. As an official Tohatsu dealer, and a one-man operation, I got the personal service with a corporate back-up and support that I wanted.

Yesterday I made a 300 mile round trip including stopping at Barry's BD Marine in Stone Lake, WI to lay my eyes on the motor for the first time. A half hour later I was on the road to our campsite 45 mins away. After a couple modifications, I got the motor fit on the boat, devised a brace to support it and take a little pressure off the transom for our short 1/8 mile drive to the boat landing through the woods, and put it in the water for the first time. I'm on duty at the bike shop today again, so after some fun with the 'toon, I headed back home.

Here's a couple photos and a short vid of my day. Fun stuff! It's a lot like rat rodding our bike builds; we take things that weren't stock or original and add to what we have to make something cool!
View attachment 163079


View attachment 163080



View attachment 163081




ToOn oN~!

Total sweetness !!!!
 
"What in the wide, wide, world of sports is going on here?!?" ~ Slim Pickens in Blazing Saddles
It's July, and OddJob isn't done with his RRB BO build yet??

I've been doing some creative work on the '53 Bel Airflow Shelby, but not physically 'on the bike' per se. Photos coming soon on the results of said creative work.

Another thing that has been keeping me busy since April 8 is working with my son on building his drum studio in the lower level of his house he purchased in March. A drummer for the past 16 years, he has spent much of that time without a suitable place to set up his two acoustic kits. We started with an end extension of his lower level, and he now has a sound proofed, acoustically treated drum / recording studio of his own.

I learned a bunch of new terms and 'how to's' during this process. It was cool working side by side with Kyle and his girlfriend and her dad. We spent many evenings and weekend days together over the past 3 months.
156008160_275593500587523_7304264759714030101_n.jpg



154882267_732898414089813_3381837176747853510_n.png

156998609_978817745855933_6635332025848964736_n.jpg

This mass loaded vinyl went up over the Rockwool Sound insulation and was nailed to the framing. It weighs 1 lb per sq foot. Our pieces were 4' x 7.5', so about 30 lbs each. Think of holding a soaking wet quilt above your head on a step ladder.


156726543_297020691984763_1396745284105316225_n.png


We tore the ceiling out of the space, stuffed the ceiling with the Rockwool insulation, then installed these clips to the ceiling joists , and then hung the aluminum hat channel rails to the clips, which we then screwed 5/8" drywall to. It creates a 'suspended and de-coupled' ceiling so there is little transmission of vibration to the floor above.


153616987_1602537979949395_4210939146656044848_n.png


158255467_1121663331640145_1233212471296707909_n.png

170530988_164021012258712_2153299249832040154_n.png


unit1-ceiling-hat-channel-big.jpg


On our new walls, and another wall that backed up to a closet, we doubled the drywall on the inside and used a Green Glue in between the sheets of drywall. It's a caulk that never really hardens up, so it adds a flexible 'buffer' and dampener to the sound waves. No photos of this process, everybody's hands were full.

On the new walls and the closet wall, we added a layer of Acoustiblok Wall Covering, which is a space-aged 1/4" thick soft foam like material covered with a metalic fiber that further absorbs and helps attenuate the sound inside the room. (takes out the 'ringing' highs and mid-range ear drum pounder vibrations) You hang it using indoor / outdoor carpet adhesive. Yes, it was heavy. This we covered with a pre-pasted textured wall paper.
WallcoverMergedImage900Reduced.jpg


207485043_175443861220770_1612607872207464994_n.jpg


We painted the other walls, installed the lights, and hung the acoustic panels. Added 'bass traps' (to absorb the lowest bass vibrations which always travel along a flat surface and gather in the corners), and put the rugs down under the kits. Then last night Kyle and I set up his kits, and we both felt a big sense of accomplishment and satisfaction! Here are some final shots to take this home....thanks for watching!


188883127_886964805185647_565387344377284814_n.jpg




206212122_351398216399803_5039287553134408435_n.jpg




207408110_2050254638470471_461512403359700832_n.jpg


The top two snares on this rack we built last Fall in our first attempts at making stave-shell drums.


211681279_204472045012484_3956835459074276984_n.jpg


205892681_2185233981608160_5418117060616719315_n.jpg



210781640_188752643118940_6705981018187223663_n.jpg



211467502_333142461734147_1616333925339343747_n.jpg


212893193_2625711187730561_6895413166694409121_n.jpg
 
"What in the wide, wide, world of sports is going on here?!?" ~ Slim Pickens in Blazing Saddles
It's July, and OddJob isn't done with his RRB BO build yet??

I've been doing some creative work on the '53 Bel Airflow Shelby, but not physically 'on the bike' per se. Photos coming soon on the results of said creative work.

Another thing that has been keeping me busy since April 8 is working with my son on building his drum studio in the lower level of his house he purchased in March. A drummer for the past 16 years, he has spent much of that time without a suitable place to set up his two acoustic kits. We started with an end extension of his lower level, and he now has a sound proofed, acoustically treated drum / recording studio of his own.

I learned a bunch of new terms and 'how to's' during this process. It was cool working side by side with Kyle and his girlfriend and her dad. We spent many evenings and weekend days together over the past 3 months.
View attachment 164007


View attachment 164008
View attachment 164009
This mass loaded vinyl went up over the Rockwool Sound insulation and was nailed to the framing. It weighs 1 lb per sq foot. Our pieces were 4' x 7.5', so about 30 lbs each. Think of holding a soaking wet quilt above your head on a step ladder.


View attachment 164010

We tore the ceiling out of the space, stuffed the ceiling with the Rockwool insulation, then installed these clips to the ceiling joists , and then hung the aluminum hat channel rails to the clips, which we then screwed 5/8" drywall to. It creates a 'suspended and de-coupled' ceiling so there is little transmission of vibration to the floor above.


View attachment 164011

View attachment 164012
View attachment 164013

View attachment 164014

On our new walls, and another wall that backed up to a closet, we doubled the drywall on the inside and used a Green Glue in between the sheets of drywall. It's a caulk that never really hardens up, so it adds a flexible 'buffer' and dampener to the sound waves. No photos of this process, everybody's hands were full.

On the new walls and the closet wall, we added a layer of Acoustiblok Wall Covering, which is a space-aged 1/4" thick soft foam like material covered with a metalic fiber that further absorbs and helps attenuate the sound inside the room. (takes out the 'ringing' highs and mid-range ear drum pounder vibrations) You hang it using indoor / outdoor carpet adhesive. Yes, it was heavy. This we covered with a pre-pasted textured wall paper.
View attachment 164023

View attachment 164024

We painted the other walls, installed the lights, and hung the acoustic panels. Added 'bass traps' (to absorb the lowest bass vibrations which always travel along a flat surface and gather in the corners), and put the rugs down under the kits. Then last night Kyle and I set up his kits, and we both felt a big sense of accomplishment and satisfaction! Here are some final shots to take this home....thanks for watching!


View attachment 164025



View attachment 164026



View attachment 164027

The top two snares on this rack we built last Fall in our first attempts at making stave-shell drums.


View attachment 164028

View attachment 164029


View attachment 164030


View attachment 164032

View attachment 164033
Awesome attention to detail. Especially the bass traps. Most people forget the corners
 
Dang buddy, this makes the projects that are preventing me from building the Humpster look like nothing!
Great attention to detail and the finished product looks like a pro install.
You may need to change your forum handle from ‘Oddjob’ to ‘FreakingAwesomeJob’
🤣👊🏼👍🏼
 
There is a lot of cool tech going on with those materials. It came out super clean though. I guess we have to wait for the next installment for the fauxtina version :D :D :D .
 
We all know that feeling we get when the tracking history on a shipped part says "Out for delivery".
And, there's something about getting that surprise on a Friday that says 'welcome to the weekend'!

Yesterday, just before happy hour, I got a package in the mail. And the special part about it was that I had not seen it before, except on a jpeg conceptual design that I had worked up. First time dealing with this company, but all our communication had been very professional and timely. And they treated me like their best customer, even though my job was very small and they were backed up for a few days because of machine repairs.

Mine is not an original idea, but rather another throwback to the auto industry of yesteryear, and their use of 3D metal logos for their models and brands. Other builders on here have used them, and I have always liked the look. So, here's what I got in the mail via OOPS yesterday:

211777930_511031993453680_1786881167950503796_n.jpg


213628543_218178506849989_5262112995898562518_n.jpg


The laser cut steel designs are 1/8" thick, and I used the Magneto font to emulate the '50s style logo of the Chevy brand. It's not exact, but rather a ' pay homage' to their style.

212400789_360649752297627_6725400545792971089_n.jpg


Then of course, since it's raw steel, it reacted very quickly to my sea salt and Rust Maker combo of faux tina.

211826396_3893825884076754_3984763693819555801_n.jpg


212963603_502721097621678_8911981573993375361_n.jpg


213229529_877602713106972_4527411765370248059_n.jpg


And it all happened during the course of one 'beverage'. The Handlebar was open....

215200144_412162910030217_5122594753705399007_n.jpg


210224536_506353917098444_7742555028690866434_n.jpg



Soon that open space on the tank and chain guard will have a new addition.

213665305_512045113345638_2743600838638871591_n.jpg



RaT oN~!
 
Thanks Matti! I am very happy the way the design came to life and the 'surreal rust'.
 
"What in the wide, wide, world of sports is going on here?!?" ~ Slim Pickens in Blazing Saddles
It's July, and OddJob isn't done with his RRB BO build yet??

I've been doing some creative work on the '53 Bel Airflow Shelby, but not physically 'on the bike' per se. Photos coming soon on the results of said creative work.

Another thing that has been keeping me busy since April 8 is working with my son on building his drum studio in the lower level of his house he purchased in March. A drummer for the past 16 years, he has spent much of that time without a suitable place to set up his two acoustic kits. We started with an end extension of his lower level, and he now has a sound proofed, acoustically treated drum / recording studio of his own.

I learned a bunch of new terms and 'how to's' during this process. It was cool working side by side with Kyle and his girlfriend and her dad. We spent many evenings and weekend days together over the past 3 months.
View attachment 164007


View attachment 164008
View attachment 164009
This mass loaded vinyl went up over the Rockwool Sound insulation and was nailed to the framing. It weighs 1 lb per sq foot. Our pieces were 4' x 7.5', so about 30 lbs each. Think of holding a soaking wet quilt above your head on a step ladder.


View attachment 164010

We tore the ceiling out of the space, stuffed the ceiling with the Rockwool insulation, then installed these clips to the ceiling joists , and then hung the aluminum hat channel rails to the clips, which we then screwed 5/8" drywall to. It creates a 'suspended and de-coupled' ceiling so there is little transmission of vibration to the floor above.


View attachment 164011

View attachment 164012
View attachment 164013

View attachment 164014

On our new walls, and another wall that backed up to a closet, we doubled the drywall on the inside and used a Green Glue in between the sheets of drywall. It's a caulk that never really hardens up, so it adds a flexible 'buffer' and dampener to the sound waves. No photos of this process, everybody's hands were full.

On the new walls and the closet wall, we added a layer of Acoustiblok Wall Covering, which is a space-aged 1/4" thick soft foam like material covered with a metalic fiber that further absorbs and helps attenuate the sound inside the room. (takes out the 'ringing' highs and mid-range ear drum pounder vibrations) You hang it using indoor / outdoor carpet adhesive. Yes, it was heavy. This we covered with a pre-pasted textured wall paper.
View attachment 164023

View attachment 164024

We painted the other walls, installed the lights, and hung the acoustic panels. Added 'bass traps' (to absorb the lowest bass vibrations which always travel along a flat surface and gather in the corners), and put the rugs down under the kits. Then last night Kyle and I set up his kits, and we both felt a big sense of accomplishment and satisfaction! Here are some final shots to take this home....thanks for watching!


View attachment 164025



View attachment 164026



View attachment 164027

The top two snares on this rack we built last Fall in our first attempts at making stave-shell drums.


View attachment 164028

View attachment 164029


View attachment 164030


View attachment 164032

View attachment 164033
Beautiful!!!!
 
Those are killer 3D doodads right there!!!!
The aging you did is perfect !!!! I can't wait to see those installed!!!
 
Those are killer 3D doodads right there!!!!
The aging you did is perfect !!!! I can't wait to see those installed!!!
Thanks KF! I'm working on it today. Results later!
 
@Oldbiscuit and others, I used a two part Cold Weld by Permatex to bond the metal emblem to the tank. I have used this before, the suspended flames on Trans-Mig-RaT, head badge on Helen Wheels, etc. Spread it really thin with good coverage. I also 'shaped' the emblem slightly by using my hands so it fit the curves of the tank better. Dries quickly and bonds really well.

Took the '53 Shelby out for a spin. I had forgotten about a cedar fence a couple blocks over that has transitioned into a nice aged look. Might be a new photo op spot...


215270499_1055666575182109_1714294725452226754_n.jpg


213416440_4062713293777279_7937853259407697321_n.jpg

213016192_555602945444595_8287866770294375698_n.jpg

213446705_542825950472360_6913353808351624133_n.jpg


215945248_954099232048488_2222738233149960789_n.jpg



RaT oN~!
 
We all know that feeling we get when the tracking history on a shipped part says "Out for delivery".
And, there's something about getting that surprise on a Friday that says 'welcome to the weekend'!

Yesterday, just before happy hour, I got a package in the mail. And the special part about it was that I had not seen it before, except on a jpeg conceptual design that I had worked up. First time dealing with this company, but all our communication had been very professional and timely. And they treated me like their best customer, even though my job was very small and they were backed up for a few days because of machine repairs.

Mine is not an original idea, but rather another throwback to the auto industry of yesteryear, and their use of 3D metal logos for their models and brands. Other builders on here have used them, and I have always liked the look. So, here's what I got in the mail via OOPS yesterday:

View attachment 164120

View attachment 164121

The laser cut steel designs are 1/8" thick, and I used the Magneto font to emulate the '50s style logo of the Chevy brand. It's not exact, but rather a ' pay homage' to their style.

View attachment 164122

Then of course, since it's raw steel, it reacted very quickly to my sea salt and Rust Maker combo of faux tina.

View attachment 164123

View attachment 164124

View attachment 164125

And it all happened during the course of one 'beverage'. The Handlebar was open....

View attachment 164126

View attachment 164127


Soon that open space on the tank and chain guard will have a new addition.

View attachment 164128


RaT oN~!
THIS IS AMAZING
 

Latest posts

Back
Top