Basket-Case 🛒

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Conceptual idea in rat rod style at this point.
019314F9-A704-4ABC-BFDA-BD7E84B23A87.jpeg

The fork has a pivot point, a sliding connection at bars to basket to ease up the frame lean when turning. Need to fine tune this, along with adding a failsafe bar to handle connection.
Now what kind of stress will the basket handle? Possibly looking for a crash test dummy…
 
Dugout a couple of old skiptooth chains. Started them soaking in some WD-40. I like to bag them and freshen up the solution every other day for a while. Hopefully one of them will workout.
F3B7CCE0-E8F8-40CF-BD4B-14408F88A048.jpeg
93C6459E-05DD-4662-81DA-1FF48DEB300B.jpeg
64A130E1-7184-4726-8067-56260687C0D4.jpeg
2FDD35B1-03E3-44BB-8156-9C104C7A8D48.jpeg
 
Conceptual idea in rat rod style at this point. View attachment 192311
The fork has a pivot point, a sliding connection at bars to basket to ease up the frame lean when turning. Need to fine tune this, along with adding a failsafe bar to handle connection.
Now what kind of stress will the basket handle? Possibly looking for a crash test dummy…
Call up Sheldon Cooper, he'd make a great Crash test Dingus... Good luck...
 
Bolt the cart solid to the frame, allowing room for the handlebars to turn. The ends of the forks could move rods that pivot the axle. Centering springs and cambering the wheels out at the bottom might help it handle too. Really just trying to figure out a way to get the steering on a flat plane...
Just thinking out loud, this is a cool project. That vintage cart is awesome.

Carl
 
Last edited:
Bolt the cart solid to the frame, allowing room for the handlebars to turn. The ends of the forks could move rods that pivot the axle. Centering springs and cambering the wheels out at the bottom might help it handle too. Really just trying to figure out a way to get the steering on a flat plane...
Just thinking out loud, this is a cool project. That vintage cart is awesome.

Carl
What you describe is what I did with Trike-Tor a couple of years ago.
Going to experiment with reducing head tube rake angle without scraping pedals on ground.
 
Last edited:
To avoid falling onto the slacker page I did some mock-up modifications this morning. I made a new fork pivot bracket that let me reduce the head tube rake and lower the mount about 2”. This reduces the frame tilt some more. Still need to work out a slip connector at bars.
I also dropped the basket an inch. I still have pedal clearance, low and slow…
EAD32BB4-95D1-435E-A7B0-49C1DE0BDC1A.jpeg
BEB857B8-C5DD-439A-B12F-C88DB3239E63.jpeg
CE454EC9-2FDB-405D-87CD-B204D06DFF32.jpeg
648EF4D4-9376-4A47-BD01-C31E3DDEEDA9.jpeg
 
I noticed that making sparks fly is considered a highlight…
In making my new fork pivot bracket, I used a cutoff wheel and grinder to fab the rusty steel angle into shape. I just didn’t record any video of all the sparks I generated. I even drilled three holes and made metal chips.
8D7A4467-C832-4ED5-9710-1FD4DC75E0EE.jpeg
FDAACDB5-49E5-4504-B322-5D4F2C448FF1.jpeg

F43E9A06-8BA5-42DB-A243-C22A9E217560.jpeg

Added some pedals to check for ground clearance.
 
Last edited:
Lol cutting an Elgin is a little different than grinding angle iron
Really, the steel angle is probably as old as an Elgin. It came from my folks property at least 70+ Years ago, so not quite as old as an Elgin.
And the angle came off the end of a long piece that acts as the wheel stop for my wife’s Mazda car.
1/4”x 3” x 3” angle, it got shorter by 4”.
3E5611F7-9683-432D-8251-79E75A85B5C0.jpeg
 
Last edited:
I played around with the steering while it was still cool, 94 now. Also made a todo list. The frame is pretty much vertical in the following pics. The steering is limited and the turning radius would be large at this point.
6CFF19AF-EE5A-4CE4-9D86-B07DA3051C96.jpeg
D7927BBA-DD7F-40A0-BF6A-97CA69AA27B3.jpeg
472C06B6-D7C5-4585-BC62-57D6D656B2F9.jpeg

I thought I had a couple hatchback dampeners, but I think I sold them at a swap meet as I can’t find them.
so I’ll try to make a couple of springs work as counteracting dampeners.
 
Really, the steel angle is probably as old as an Elgin. It came from my folks property at least 70+ so not quite as old as an Elgin.
And the angle came off the end of a long piece that acts as the wheel stop for my wife’s car.
Let them sparks fly!

054.gif
 
106EF662-A9A8-4654-83BF-C79C21736030.jpeg
185509DE-77D2-4421-AD01-D847B1E66342.jpeg
Rough mounted a couple of 1” DIA x 35.4 lbs safe working load springs to counteract the steering pivot. It’s a start, needs a little rat rod tuning.
Also picked up a couple of eye bolts to stabilize the axle with the cart basket.
 
Last edited:
Decided to mock-up axle stabilizer using a couple 3/8” x 4” eyebolts with a 1”+/- opening which fits over axle black iron housing. The eyebolt snakes through basket and is held in place with a washer stack, lock washer and nut. Still need to redrill one hole on basket clip angles.
Funny how the forum software doesn’t place photos in the order you select them when uploading.
F4517434-8A19-4F4B-A87F-A53702E9714C.jpeg
099B2639-A8E1-407A-9761-CEF586639794.jpeg
C237F29B-A4D9-4E5C-8080-CE831C2DF316.jpeg
13298B71-BC47-4640-ADB2-340BACFEA33A.jpeg
FB0BA9E4-A772-4FD4-AA5C-7C5454A25858.jpeg

Probably going to work on cleaning up a chain in order to find out how squirreling funny this rides as is.
 
I had a pair parade bars…so experimented with attaching them to basket and fork pivot. Just an idea at this point. We’ll see how it goes when I get the chain on.
415ADFA0-9FC5-4D35-B880-34554EDB84DB.jpeg
18EE6548-C667-4922-8819-97E847EE6518.jpeg
D42EBBAD-9CAA-45CE-B142-DF3188BB414A.jpeg
F769E093-A337-407B-B01C-3799E9BA1CCE.jpeg
AAA409AA-8F8E-4220-B364-20FBF2529DC0.jpeg

Just combining unconventional parts in a unique, maybe crazy way to make a functional mechanical device in this case a rat rod rear drive tricycle.
F9FBC99B-7018-4D39-9EAF-5E62706DD337.jpeg
 
Working with two chains to get one skiptooth the right length. Need to find the quick links in my shed. Hope I have two and I still need to remove one pin.
Maybe a death-ride on Monday…
013411F1-435E-4EEA-B135-9B1C387C4FCB.jpeg
51C8F9E8-42DC-4E10-BB37-F7F5265C08E9.jpeg
7CDB9757-5A71-48DA-B78F-29AF351DA3BF.jpeg
 

Latest posts

Back
Top