Build Off Rules
This whole competition is all in good fun. The whole point is to be creative, build something cool and have fun!
Class 1: Traditional Builds
This class is pretty much bolt-on, mix n' match parts, with no structural modification, i.e. cutting / welding, to the original starting frame. Very minor modifications are acceptable like adding brackets, grinding off tabs, etc. This is more of an old school build category created for folks who may not have pro level fab and welding skills. If it appears that your modifications are too extensive you may be asked to move to Class 2. Below is an example of a build that would fit in Class 1.
Class 2: Anything Goes
This class has no restrictions on frames and forks. Can be completely fabricated from scratch or heavily modified factory frames…feel free to go crazy!
* Electric or gas powered bicycles are acceptable submissions, but they must be pedal powered as well.
- Bike build must begin on or after May 1st, 2022. This isn't a bike show...it's a build off competition. The point is to build a bike and document the progress in the time frame given.
- You can only enter one bike per class in the build off (can change bikes once if needed)
- Start a new thread in the forum’s Build Off section and use the bike name as the post “Subject/Title.” Keep a running journal in your thread about your build.
- Must include before, progress, and finished photos (all in one thread please)
- Bike must be ride-able and pedal powered.
- The Build Off #17 will begin at 12 am North American Central Time on May 1st, 2022 and Final finished bike photos must be posted in the “Finished Bikes” thread by 12 noon on Tuesday, September 6, 2022.
- Any questions about the build off must be submitted in the discussion section.
- Please be courteous to others and do not fill their build journals with off-topic posts. If it continues after a moderator warning, your account will be nuked.
This whole competition is all in good fun. The whole point is to be creative, build something cool and have fun!
Class 1: Traditional Builds
This class is pretty much bolt-on, mix n' match parts, with no structural modification, i.e. cutting / welding, to the original starting frame. Very minor modifications are acceptable like adding brackets, grinding off tabs, etc. This is more of an old school build category created for folks who may not have pro level fab and welding skills. If it appears that your modifications are too extensive you may be asked to move to Class 2. Below is an example of a build that would fit in Class 1.
Class 2: Anything Goes
This class has no restrictions on frames and forks. Can be completely fabricated from scratch or heavily modified factory frames…feel free to go crazy!
* Electric or gas powered bicycles are acceptable submissions, but they must be pedal powered as well.
Last edited by a moderator:
