Cooked goose

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That is one unusual headtube extension. You are a crazy man.
Have fun with your minion of dozer. :D
 
Well, my build just went from frozen turkey to fiery phoenix in a hurry. I was helping my buddy load up a bunch of scrap last night when I came across a riding lawnmower front axle his grandpa ran over with a tractor. Something about it caught my eye, so I grabbed it and a vision flashed in my head. I totally forgot to take pics of the before and most of the during, but I measured the thickness of the axle and it was 1.5 inches, the same as my bikes head tube, but it was about 3/4” shorter than the tube, and after I knocked the bronze bushings from the steer tube I found that 1" bearing cups could fit with a little coercion PERFECT! The plan is to create a bolt on head tube rake and a slight extension. I found a similar axle pic on the internet, so I drew on it where I cut it out
.View attachment 157384View attachment 157386
To be completely honest, I did reinforce a few welds on it, but nothing that wasn't already there. Next, I used a carbide grinding bit to open up the mouth so that 1" bearing cups would fit
View attachment 157385
Test fit. Got some trimming to do.View attachment 157388View attachment 157389
And voila! Still got lots of fitting and testing to do, but it's looking pretty darn good!View attachment 157391View attachment 157392
Now I've got to find a new fork to put on it. The ones I've been using are 1 1/8” steerer tube, now it's a 1" tube.
how to weld this piece of iron on the aluminum frame?
 
That is one unusual headtube extension. You are a crazy man.
Have fun with your minion of dozer. :D
Dozer the Dozerian? You could say I'm as mad as a hatter, Lol. I get random ideas like this all the time, but too many of them vanish like a thief in the night.
 
Dozer the Dozerian? You could say I'm as mad as a hatter, Lol. I get random ideas like this all the time, but too many of them vanish like a thief in the night.

Yeah, a lot of my ideas are like Andy from Shawshank.

 
Had some time to think on how I could secure the new head tube to the frame and simplicity won. I decided to cut some 1/4” steel with a hole saw to fit inside the old tube and run a bolt through the whole mess.
IMG_20210514_180104712.jpg
IMG_20210514_185016298.jpg
IMG_20210514_185611244.jpg
IMG_20210514_190336841.jpg

IMG_20210514_190818671_HDR.jpg

IMG_20210514_191611281.jpg
IMG_20210514_194953007_HDR.jpg

This way it can't slop around in the frame, and it's still very secure.
Oh, and I decided to ditch the pre war wheels on favor of something a little more flashy. Who knew that early 50s JC Higgins beehive springer forks could fit a 65mm rim and still have clearance for the fenders? I didn't, but now I do.
IMG_20210514_194409192_HDR.jpg
IMG_20210514_194400760_HDR.jpg
 

Attachments

  • IMG_20210514_191456908.jpg
    IMG_20210514_191456908.jpg
    182.9 KB · Views: 55
  • IMG_20210514_194956196.jpg
    IMG_20210514_194956196.jpg
    256.3 KB · Views: 48
Well, now I know why I got such a great deal on the beehive springer forks. They're pretty badly bent to the left. I should be able to straighten them though
IMG_20210516_131836477_HDR.jpg
 
Those blade forks shouldn't be hard to tweek back into alignment.
 
@kingfish254 the forks from your buddy's build are on my other bike, Colorblind Hipster. These bent ones are from a ladies Color Flow I was given late this winter. Your buddy's forks were pretty loose, but for the most part straight and true
IMG_20210317_180456726.jpg
 
Yeah, I realized I was confused and you actually had two different beehives.
 
Alright, finally straightened the fork so I can continue building.
IMG_20210531_135155877.jpg

Also removed the shorty pedal arms and fugly sprocket because the tooth pattern is different than the chain I want to run.
IMG_20210531_133246557_HDR.jpg
IMG_20210531_133800044.jpg

IMG_20210531_135626157.jpg
 
I went for a short ride on it and it was just too cramped. I guess I've gotten too used to stretched out builds lately. Doesn't help that I'm 6' 1", trying to ride a bike designed for normal sized folks. So I think I'll try a different variation of my bolt on stretch modification from last year's build off bike Full Monty
Screenshot_20210531-161501.png

The biggest difference between last year and what I'm trying now it's that I now have to relocate the bottom bracket, because I'm going to lower the frame to just about 2" of ground clearance. Additionally, the aluminum frame has a European BB shell, and I want to run an American single piece skip tooth crank. That's right, I'm going full madhouse and building a stretched and lowered skip tooth. That is, assuming I can pull this off. This is one reason I chose an alloy frame, so there would be no contestation about me welding and extensively modifying the frame.
IMG_20210531_135127570.jpg

IMG_20210531_135101158_HDR.jpg
 
Howzdagooose?
 

Latest posts

Back
Top