Felt Heavy Duty

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
And a few more that I took some elements from.
b41cda6d3a8399582d43f856e738299d.jpg
3290d04d9030b90bf79b1b4194f1f491.jpg
20c45dc913f48723b536b15a2e729879.jpg
2a0088257617f2fb1aa0e1df53c4c28f.jpg

f2743d1d13118c0ca6c6a04d10706907.jpg

I was able to restrain myself from trying the cream wheels from the chopper. In the end I want the bulky heavy duty look and not necessarily the 20s vibe.
 
I took the mounting bracket from a Tacho and used it to install a fender, or a piece of fender.
IMG_20210630_133438.jpg
IMG_20210630_150204.jpg

IMG_20210630_114748.jpg

I tried a longer piece but didn't like it:
IMG_20210630_135553.jpg

IMG_20210630_150144.jpg

I used the longer piece for the rear, there is a gap though:
IMG_20210630_145930.jpg

I might simply cover the angled rack section with some plate that I cut to shape.
IMG_20210630_154644.jpg
 
Last edited:
I thought about that:
IMG_20210615_214610.jpg

I couldn't come up with a reversible way to attach leading and mounting points for the rods and I don't want to drill holes in the tank either.

The problem with revo shifters is that they are way too bulky and require a lot of grip area on the bars. Very annoying.
 
I thought about that:
View attachment 163660
I couldn't come up with a reversible way to attach leading and mounting points for the rods and I don't want to drill holes in the tank either.

The problem with revo shifters is that they are way too bulky and require a lot of grip area on the bars. Very annoying.
Maybe an idea for some other bike in the future, then.

Now I wish I had thought about rods earlier, I could have modified a downtube changer for my IGH hub...
 
Yes, for the life of me I couldn't remember on what I had seen them! For my build I am trying to avoid buying online, keeping things local as it were, but it has given me an idea how to make one... :)
 
My grips won't stay in place. Can I use hairspray (I think I read that somewhere)? And can I easily remove it if needed with wd40?
I used hairspray on Duck Norris's grips. The non aerosol type. Finesse maybe? It isn't sticky enough for my old worn grips, they still rotate. Shouldn't be too tough to clean off, people wash it out of their hair
Ditto. Works well for a non permanent solution. It's also what I use on carbon fiber bars because I don't want any funny business under the grip with the carbon resin and spray paint (my go to fastening method)
 

Latest posts

Back
Top