my next waste of money.

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
my new to me crank set ups on the way. 70's Schwinn Mag sprocket 46 tooth on Schwinn Apple krate cranks.
:D
s-l1600.jpg

s-l1600.jpg
 
:rolleyes: I know I bought more Bell helmut stickers just don't know were I put them .
I have a few of those stickers that came with a "Saved By The Bell" certificate. IIRC, I still have at least one of the certificates. Mountain Biking in Colorado can be tough on gear sometimes.
 

Attachments

  • Screenshot_20220921-031701.png
    Screenshot_20220921-031701.png
    700.1 KB · Views: 0
  • Screenshot_20220921-031728.png
    Screenshot_20220921-031728.png
    695 KB · Views: 0
  • Screenshot_20220921-031803.png
    Screenshot_20220921-031803.png
    699.1 KB · Views: 0
The end of the cross bar is flat and will fit through the stem if you fully remove the clincher bolt.
yup pull bolt out. pry jaws more open. with a screw driver threw bolt hole. install bars. bend back down. slide bolt back on tighten it all up.
 

Latest posts

Back
Top