nichoflamebike1

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

Joined
Jul 30, 2012
Messages
20
Reaction score
7
Location
mn
ndunl.jpg
nnrk.jpg
fqb3.jpg
8oms.jpg

These are the finished photos of my flamebike1
 
Joined
Jul 30, 2012
Messages
20
Reaction score
7
Location
mn
Good job. You getting it now! I'm in the same boat as you, it's much easier for me to spin wrenches than use computers.
I'm interested in knowing how you got the fabric/suede to stick to the metal bits. Details please.
i use a high temp hot glue and a lot of sewing, but the trick is in getting a nice seam
 
Joined
Jul 30, 2012
Messages
20
Reaction score
7
Location
mn
had to rework the enitire rear fender mounts so i could get full air in the rear tire without it rubbing no major changes
 
Joined
Jul 30, 2012
Messages
20
Reaction score
7
Location
mn
honestly can not wait for next build off i got myself a trike that i am itching to do something with
 
Joined
Jul 17, 2012
Messages
368
Reaction score
172
Location
Qld, Australia
i use a high temp hot glue and a lot of sewing, but the trick is in getting a nice seam

Can you post some closer photos?
Especially where the green leather and the red are close to each other. It sounds like you have acheived something very different and special.
 
Joined
Jul 30, 2012
Messages
20
Reaction score
7
Location
mn
I got some closer photos of the bike for all to see
And the seat actually sits moff of the rack.
So it adds spring and cush to the seat. I used a recurved pole that holds good weight.



eyddcb6aj
 
Joined
Jul 30, 2012
Messages
20
Reaction score
7
Location
mn
However my computer is not working so I'm having pic post issues
 
Top