• Congratulations!

    To the Class One

    and

    Class Two Winners!!!

(ORBO) MasterSports/CyclePro (HEATSINK DONE AND FITTED!)

Help Support Rat Rod Bikes:

Joined
Nov 17, 2012
Messages
21,386
Reaction score
18,256
Location
Broken Hill, Australia
This is my second entry for the ORBO, a much simpler entry than the other one...

Got this bike from local forum member @kelvin hahnel

22442692900_7b3ab87ee5_z.jpg


Very cool old MasterSports that appears to be a rebadge or copy of the cool old CyclePro's, plans are mainly just to clean it up, fit up my Araya 7X wheelset with the rear hub switched to coaster for cable free good looks, going to try a few little modifications inside the coaster to give it more breaking capacity and longer life as suggested by the fine people at Coaster Culture.

Probably going to hit it with some 2K clear after a good cleaning to keep it looking that nice balance of well looked after but also used and enjoyed, not sure what seat to use on it yet, but I have 3 possibilities in mind. Already sourced some original style gum walls, which were surprisingly hard to find, many these days seem to be either too slick in the tread or the tan/gum wall is painted on...

23094227541_c62054c761.jpg


Should be a good, simple, fun, fairly light bike to cruise around on, but still tough enough if the going gets rough. Basically a bigger version of my bike I used to ride to school!
Pretty sure it will get a big percentage of my riding time when it is done.

Luke.
 

metalchewy

Make It, Build It, Ride It
Pro Member
Joined
Jul 1, 2014
Messages
2,374
Reaction score
5,067
Location
Las Vegas Area
Good Looking frame.

Makin an adult sized BMX freestyle with that one??? :)

Building... riding...
 
Joined
Nov 17, 2012
Messages
21,386
Reaction score
18,256
Location
Broken Hill, Australia
Good Looking frame.

Makin an adult sized BMX freestyle with that one??? :)

Building... riding...
Not freestyle, more an on and off road cruiser/skidder.

Luke.
 
Joined
Jan 20, 2013
Messages
192
Reaction score
340
Location
San Diego
Dig the tires, whose are those? Schwinn Maximisers being so expensive (you really going to roll 35 year old $400 tires?) those look a pretty good "don't look too close" approximation.
 
Joined
Nov 17, 2012
Messages
21,386
Reaction score
18,256
Location
Broken Hill, Australia
Dig the tires, whose are those? Schwinn Maximisers being so expensive (you really going to roll 35 year old $400 tires?) those look a pretty good "don't look too close" approximation.
They are "Hwa Fong" 26X2.125 Made in Taiwan. I know where to get them in Australia, but no idea over there... Maybe type Hwa Fong into eBay or Amazon?

Luke.
 
Joined
Sep 14, 2013
Messages
6,674
Reaction score
14,495
Location
Bradley Illinoiz
Two builds you say....hmm...
maybe I can build the crazy hillclimber too...
Let's see where I'm at with my first build in a couple months.
I do like this simple build.

Carl.
 
Joined
Nov 17, 2012
Messages
21,386
Reaction score
18,256
Location
Broken Hill, Australia
Two builds you say....hmm...
maybe I can build the crazy hillclimber too...
Let's see where I'm at with my first build in a couple months.
I do like this simple build.

Carl.
As many entries as you think you can finish the rules say... ;)

Luke.
 
Joined
Nov 17, 2012
Messages
21,386
Reaction score
18,256
Location
Broken Hill, Australia
What upgrade to hub?
Going to chamfer the leading edge of the brake shoes to help with greasing and change to loose ball with extra ball bearings to spread the loads better, I may have a Shimano guts here I can do that work to and shove the whole lot into the KT shell, if not, I will do it to the KT guts.

Luke.
 
Joined
Nov 17, 2012
Messages
21,386
Reaction score
18,256
Location
Broken Hill, Australia
I like the way this is going. :)
Cool! It should be a fun, simple, cruisey ride!

I just had a look in my bike pile and there is a Shimano B type there with a 28 hole shell, I know people normally use the CB-110 guts for the swap, but I am hoping the B type fits too... One way to find out!

Surprising how hard it is to find Shimano coasters here in Australia, I even looked at importing a Cruiser Culture upgraded hub, but that would have been $100AUD by the time it got here!

Luke.
 
Joined
Jan 12, 2014
Messages
1,327
Reaction score
983
Location
Atlantic Iowa
I have heard that too. Is the KT really that bad? I guess I don't ride that hard tho. But I really like these simple builds like this one. Just makes a nice easy riding bike. But still with good looks!
 
Joined
Nov 17, 2012
Messages
21,386
Reaction score
18,256
Location
Broken Hill, Australia
I have heard that too. Is the KT really that bad? I guess I don't ride that hard tho. But I really like these simple builds like this one. Just makes a nice easy riding bike. But still with good looks!
Some say it is, some say it isn't.
Either way, mine is really rough and needs a rebuild anyway, so I may as well go the extra step. The biggest decider for me was the script on the brake reaction arm of the KT though, it says: 'Sidewalk use only.' Not exactly what I want going through my mind while descending a long drop... :21:

Luke.
 

Latest posts

Top