Pics of the Brooks Factory + New Brooks Break In Method

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 4, 2006
Messages
10,825
Reaction score
863
Rating - 100%
3   0   0
I ran across a couple of interesting links regarding Brooks saddles. First was some excellent pictures of the Brooks Factory.
http://www.lfgss.com/thread20533.html All the pics at London Fixed Gear
3468411481_42ac6987ca.jpg


Next was an interesting way to break in a Brooks Pro saddle. I am sure it could be used for others as well.
http://www.billbostoncycles.com/brooks_pro.htm
By Bill Boston with Drew Knox

The first thing to do is go out and buy a brand new Brooks Pro saddle! And when the salesman asks if you want Proofide, tell him where to rub it. I recommend a Brooks Pro because you want a leather saddle that is not extensively pre-treated. My personal preference runs towards the looks and leather of the Team Pro with the large rivets.

Put the saddle on the bike in the proper position. The nose should be just about flat or parallel to the ground. After it is set up, put a damp washcloth on the rear part of the saddle about an hour before you go for a ride. Make sure that it is about 2 to 3 inches in front of the rear-most part of the saddle, in the area where most of your weight will rest. The cloth should be damp but not so soaking wet that it drenches your bike. Then, just before you ride, take your thumbs and knead the area where your ischial bones will hit in order to start softening the leather. Ride an hour or two, with the washcloth OFF. (Don’t laugh, I saw a guy riding down the road leaving a dripping trail, thinking, “...., this thing’s comfortable already!”) Wear black shorts for this part as the dye will come off and stain your cloths.

Repeat this procedure of dampening and riding for five or six rides until the saddle has noticeable indentations and has taken on a curve that looks like a three- or four-year-old, well-ridden saddle. All you are trying to do is mold the leather, which is something you can’t do with a plastic saddle unless you have a mighty hot set of buns.

When your saddle fits your anatomy, stop! Now that your saddle fits, you don’t want it to absorb any more water because it will continue to change shape. Here’s how you seal it: First, expose the pores on the top of the saddle by rubbing the leather with a triple-ought steel wool until the top turns white. If you want a custom-colored saddle, now is the time. Select any leather dye - not shoe polish - which comes in a variety of colors. The idea is to fill up the pores with the new dye, which will last longer than the original and keep the water out. Lightly scrub with the steel wool between coats, and then allow the last coat to dry before buffing with a shoe brush and a cloth. Let the saddle dry overnight, then rub in paste saddle soap and brush off the excess. Remember to not wear light colored clothes as the excess dye will wear off for a while. It will stop wearing off faster than the dye that came on the saddle.

Let me take a moment to make an urgent appeal: do not oil your saddle. Oil will allow the saddle to continue to change its shape. Eventually the horn of the saddle, which should be very hard, will soften and spread and chafe. The leather is formed by wetting and shaping it over a form. The tanning agents, which stiffen the leather, are broken down and softened by the oil. Wetting the rear of the saddle with water allows that area to be remolded while the front part of the saddle remains stiff. You can’t do that with oil because you can’t stop the migration of oil through the porous leather.

Now, to finish sealing your saddle coat the underside with a non-softening snow-seal. Paste it on underneath the saddle and use a hair dryer to warm and spread it. Also bee’s wax or paraffin will work.

Finally, take precautions to keep rain off your saddle by using a shower cap, baggie, plastic shopping bag or cheap plastic cover when not riding. Your fanny will do fine as a rain protector while you are riding. You will find that your riding shorts will act as a very efficient buffer, polishing your seat to a smooth, high luster. You will also have an extremely comfortable saddle that will give years of service.
 
Ok he didn't say anything about the Brooks imprint it will leave on your rear while your breaking it in....I still got mine. :roll:
 
A Brooks saddle is alot like Scotch Whiskey. It is an aquired taste. Or you either love them or hate them.

I have 5 on bikes now. 8)
 
Uncle Stretch said:
Hey Clancy I don't drink scotch either :lol: :lol: :lol: Don't they both come from the same place???
Same island. Both good inventions in my book.

Bighit you gotta find some help.
 

Latest posts

Back
Top