Still Looking For Tandem I.D., and Parts

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 26, 2011
Messages
7
Reaction score
0
Rating - 0%
0   0   0
-1148001784609F753F.png
-118175952140F09B77.png
-104059702044FAE949.png
-75827201852CD2F44.png
-8994345190BE40C47.png
2017665504598038C7.png
19636608319B65242.png
21445845610BA834.png
1626083467A077879.png

I'm Still looking for I.D. help!!!
This Tandem rear steer has BSC threads on axles, and front fork. The front fork headset is a 1 1/4" x 26 tpi. As you can see, the rear steer rods don't use linkage to turn the front fork. What was left of the seat looked to be a Brooks, with the rear seat post is straight, and the fornt one "L" shaped. The rear double cog on axle I believe one cog was added later a perhaps add on another bike. The weld on the double cog was very poorly done. The main sprocket,axle, and bearings on the frame are held in with what seems to be made out of wood, all held in with a square flat plate, with 4 bolts.
Right now I am looking for a 1 1/4 x 26 TPI headset, 4 pedals, 2 handle bars, and 2 seats. I can't buy these parts unless I find out what this bike is. I have to finish this Project to fufill a Dear Departed Aunts wishes.
PLEASE!!! I need HELP!!! Thanks and Aloha.
 
I believe Colson was the only co. to offer a rear steer tandem. Also check out the Cabe, aka the Classic & Antique Bicycle Exchange site, where many of us are also on that forum. It's geared more towards original bikes. -Adam
 

Latest posts

Back
Top