Nirve cannibal

Bike Wall
Shop deals on ebay
BOXKARS
Advertise with us
Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
kram

kram

Pro Member
Joined
Jul 12, 2008
Messages
1,045
Reaction score
1,520
Location
Salt Lake City, UT
Rating - 100%
11   0   0
Picked this one up for cheap. It was just the frame, fork, and few other parts. I stuck some wheels on it to get it rolling. It’s a little rough and someone cut the fork legs down. I’m not really into the chopper look, so I probably would have done the same thing. I’ll probably put some 5 1/2” cranks on it and get it rideable to see if I like it.
7CC7FF6F-FDD1-42AD-90D4-2A70A09F5CBD.jpeg
 
kram said:
Picked this one up for cheap. It was just the frame, fork, and few other parts. I stuck some wheels on it to get it rolling. It’s a little rough and someone cut the fork legs down. I’m not really into the chopper look, so I probably would have done the same thing. I’ll probably put some 5 1/2” cranks on it and get it rideable to see if I like it. View attachment 217131
Click to expand...
Looks good even with those wheels
 
To get the pedals off the ground, maybe just raise the front enough to get clearance. I've found the shorter cranks make a bike hard to pedal.
 
Wildcat said:
To get the pedals off the ground, maybe just raise the front enough to get clearance. I've found the shorter cranks make a bike hard to pedal.
Click to expand...
Without buying new forks this is as high as the front can go. A previous owner cut the forks quite a bit. It might also just be a pedal scraper.
 

Latest posts

Back
Top