STBO Fashionably Late. (Temp. Name for now).

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yes it does. Unfortunately I'm may not be using it on this build. The hub it works on is a bit more expensive then I have budgeted for this build. If I had one already on hand I would use it. The local bike shop owner is going to let me go digging around in one of his pole barns full with 45 years worth of parts hoarding to see if I can find one. He thinks he has a few in there, so ill find out this weekend. If I do use it, I've got a couple ideas for the rear brake. Most likely put it down where the kickstand mounts. Haven't quite worked that out yet.
 
Decided since I'm covering the fenders with leather I'd, 1, not cover up nice chrome fenders.
2, I like the look of this style of peaked fenders better.

I think the lines work better.

So, black leather covered fenders, chain gaurd. Possibly the tank. The seat with short fringe around the bottom. Leather wrapped grips with fringe. Chrome fender braces. Dark Metalic red paint.
And now I'm second guessing the bars. Feel to large now. I'll dig out a few others and see.
20241019_082529.jpg

20241019_082611.jpg
 
Found some bars I like better then the wide apes. Pulled these of of a 2 person side by side Worksman Trike. Exactly the same height as the others, but narrower and straight up and down instead of the bent back a bit bars of the others. Painted over the black with aluminum paint. Would have been nice if chrome, but got them for free. After putting them on and snapping the 1st picture. Didn't like the empty space between the top of the forks and the bars in front of them. Easy fix. Flipped the headlight and bracket over. Very happy with them. Like the narrower lines.
20241021_103123.jpg
20241021_103752.jpg
20241021_103807.jpg
20241021_103829.jpg
20241021_103901.jpg


After that, started on wrapping the rear fender. Went with marine grade vinyl instead of leather. So far its going well.
20241021_102727.jpg
20241021_102735.jpg
 
Ended up using leather instead of the vinyl on one side off the tank so far. The gutter around the outside edge was what was having me think it wouldn't work out for this tank. When I came across this red twisted cording. Sits nicely in the gutter and covers the edge of the leather nicely.
20241021_133625.jpg

Other half of tank is up next.
 
Got the front fender wrapped. Had to order new chrome braces for it this morning. Starting over on the rear fender. Didn't like how the vinyl looked so re-doing it in leather. Really happy with how the front fender turned out so far.
View attachment 282839View attachment 282840

Ordered the paint for it last night as well.View attachment 282845

I'll be interested to see how that paint turns out. It's one of the options I was considering for my muscle build.
 
I'll be interested to see how that paint turns out. It's one of the options I was considering for my muscle build.
I've been thinking about it for quite awhile. Was torn between the Pearl Bomb or the flake bomb. Decided on flake since there is not much surface compared to a motorcycle or a cars/truck panels. And it didn't hurt this qas 25% off right now.
 
Last edited:
Time to paint.
2nd coat of primer.
When it dries 2 coats of Skid Mark black base coat.
Then as many coats of the metal flake top coat is I deem necessary. Then 1-2 coats of clear. Decided to test it on the chaingard before the frame. If all goes well I'll have the paint done then finish the leather for the rear fender and seat. And start reassembling and add the detail pieces.
20241121_215313.jpg

20241121_215724.jpg
 
1st coat of Cherry Pie Flake. Looks darker in these photos then in hand. More red and not so dark. After 1 maybe 2 more coats and better pictures when the sun comes it should look very nice. I have 2 tanks that are for this bike leather wrapping 1 set and decided to paint the other and see what looks better when assembled.

The top coat definitely not what I was expecting. It's a flake I fused clear coat. The only color is the flake. Definitely gives it more depth then I expected. Was thinking of doing a clear coat between each top coat to get the same look, saves steps, clear coat and time. After this dries each additional coat should really add depth. I'll get better pictures when it's daylight.
20241122_011951.jpg
20241122_012031.jpg
 
I'm a bit worried that the frame does not have enough surface for the paint to show up as much as I'd like. I'll know for sure after it's painted. But just in case I'm thinking of cutting 2 pieces of 1/8" aluminum plate to fill the gap between the seat post tube and rear fender and another to fill the lower half in front of thr seat post tube and the bottom edge of the tank.
20241122_020425.jpg
 

Latest posts

Back
Top