1 1/8” threadless forks for vintage Schwinn and BMX frames! Conversion headsets.

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 30, 2012
Messages
29
Reaction score
104
Location
Rockford, Wheelienois
Rating - 0%
0   0   0
Hello all-
Some of you know me from the other pages like BMX Museum or The Cabe. Looks like I just lost everything I typed, so I’ll just leave this here.
Merry Christmas!
 

Attachments

  • IMG_2908.jpeg
    IMG_2908.jpeg
    1.7 MB
  • IMG_5441.jpeg
    IMG_5441.jpeg
    1.8 MB
  • IMG_5417.jpeg
    IMG_5417.jpeg
    1.9 MB
There's been a couple of users who are having difficulty with text entry on the forum. Don't let it get you down, looks like you have some good stuff to share. We have been seeing plenty of old bikes getting the threadless updates. Perhaps you could try typing the text in notepad and copying/pasting it here...
 
Hey @scott1race , why don't you post a pick of your green Schwinn with the Christmas ornaments hanging from the top tube. I think folks here would dig it.....matthew
 
A few early photos of headset installation and testing some BMX bars on the green bike. I ended up going with some Surly bars, as these were too tall for my purposes.
 

Attachments

  • IMG_7095.jpeg
    IMG_7095.jpeg
    1.6 MB
  • IMG_7540.jpeg
    IMG_7540.jpeg
    4.2 MB
  • IMG_7365.jpeg
    IMG_7365.jpeg
    2.5 MB
  • IMG_7096.jpeg
    IMG_7096.jpeg
    1.5 MB
  • IMG_7094.jpeg
    IMG_7094.jpeg
    1.6 MB
  • IMG_7093.jpeg
    IMG_7093.jpeg
    1.8 MB
  • IMG_7092.jpeg
    IMG_7092.jpeg
    1.8 MB
Thanks. Yes, it is a simple bolt on adapter. I mounted it on the outside of my rear dropout because my rear triangle is already spread slightly to 135mm to fit a Paul MTB singlespeed rear hub. I know I should just weld it on there, but I have used it for more than 6000 miles now without any problem.
 
Thanks. Yes, it is a simple bolt on adapter. I mounted it on the outside of my rear dropout because my rear triangle is already spread slightly to 135mm to fit a Paul MTB singlespeed rear hub. I know I should just weld it on there, but I have used it for more than 6000 miles now without any problem.

Hey, Scott, got any more pics of your disc brake/rear dropout assembly ?
 
The second image shows a stainless hose clamp, which I was using when I rode this bike off-road more often. I haven’t used the clamp for 4 years now. My girlfriend and I just rode these bikes 27 miles yesterday, she gets the green bike because it’s lighter and faster 😉 Green bike was first built in May of 1958, just like me.
 

Attachments

  • IMG_0429.jpeg
    IMG_0429.jpeg
    1.3 MB
  • IMG_0724.jpeg
    IMG_0724.jpeg
    1.8 MB
The second image shows a stainless hose clamp, which I was using when I rode this bike off-road more often. I haven’t used the clamp for 4 years now. My girlfriend and I just rode these bikes 27 miles yesterday, she gets the green bike because it’s lighter and faster 😉 Green bike was first built in May of 1958, just like me.

Now this is what I have been searching for: looks sturdy enough. Do you remember the brand or where you got it?
 

Latest posts

Back
Top