TRADITIONAL 🅵🅾🅾🅻🅸🅶🅰🅽 - 1930s Elgin Oriole - 2nd Place (Tie) - BUILD JOURNAL

[kingfish254]

He said, " seeing a sexy moon" while peeking through the blinds. I guess that's better than seeing a plumber's crack!

That's the view @Dr. Tankenstein gets when we are riding our bikes.

 

[kingfish254]

At times, I've considered dulling down the tank, but I've really been enjoying the contrast of it against all of the patina.

I didn't want to bring that up, but now that you mention it..... *bobs eyebrows*

What does everyone think? Is the contrast of the shiny tank a cool thing or is it too out of sorts with the build?
Would dirty-ing up the tank with some earth tone acryllic paints do the job? Or should I consider painting it with my colonial red and ivory bisque?

 

[Captain Awesome]

What does everyone think? Is the contrast of the shiny tank a cool thing or is it too out of sorts with the build?
Would dirty-ing up the tank with some earth tone acryllic paints do the job? Or should I consider painting it with my colonial red and ivory bisque?

Don’t paint it

 

[OddJob]

Light dirty work with grey or light brown acrylic on tank might be a good way to go. Same application can be made to the grips as well.

 

[Wayne]

Don’t paint it

This ^^^

 

[BobbyStillz]

I WOULD NOT paint it or weather it.

If you want patina on the tank, just grease it a bit. That way, it can be easily cleaned, later on, if you want the shine back.

 

[kingfish254]

This memory just popped up. I got the Evans chainguard that I am using on FOOLIGAN from @joshfromga on this day 7 years ago.

 

[The Renaissance Man]

What does everyone think? Is the contrast of the shiny tank a cool thing or is it too out of sorts with the build?
Would dirty-ing up the tank with some earth tone acryllic paints do the job? Or should I consider painting it with my colonial red and ivory bisque?

One of the hardest things about creating patina is knowing when to quit.

 

[kingfish254]

Don’t paint it

This ^^^

I WOULD NOT paint it or weather it.

If you want patina on the tank, just grease it a bit. That way, it can be easily cleaned, later on, if you want the shine back.

Light dirty work with grey or light brown acrylic on tank might be a good way to go. Same application can be made to the grips as well.

One of the hardest things about creating patina is knowing when to quit.

Thanks for the feedback guys! I've been comfortable with the contrast ever since I added the moonies and the hidden stickshift. I just wanted a sanity check.

While I was making the previous earlier cut-n-fit post inside (to break away from the heat), I noticed it was dark outside, and had to quickly run out to the courtyard and pull all of my tools, table, parts and bike out of the rain they had been sitting in for 15 minutes or so. Since that band of showers passed, it's been "Sauna-vannah" here to quote DrT. We are about to have another band of thunderstorms, so I'm setting up space under our porches to start mating up parts and drilling holes for the skirt/fender/chainguard assembly.

 

[BobbyStillz]

One of the hardest things about creating patina is knowing when to quit.

100%

 

[OddJob]

One of the hardest things about creating patina is knowing when to quit.

Yep.
"Always stop before you think you are done".

 

[Dr. Tankenstein]

That's the view @Dr. Tankenstein gets when we are riding our bikes.

View attachment 274656

Yep, every time….I try to stay back though….

 

[kingfish254]

Taped up all of the pieces in there proper postions, but also placed foil tape in key places to scribe easy to see part joint alignment marks. I hope my roll of tape last for 6 more days!
I have these neat rivet screws for the joining.

 

[Dr. Tankenstein]

Taped up all of the pieces in there proper postions, but also placed foil tape in key places to scribe easy to see part joint alignment marks. I hope my roll of tape last for 6 more days!
I have these neat rivet screws for the joining.

View attachment 274717View attachment 274718View attachment 274719View attachment 274720View attachment 274721View attachment 274722

‘Smoove’ move with the fender screws

 

[kingfish254]

Chainguard is mounted.

 

[kingfish254]

Flying fish art

 

[Dr. Tankenstein]

You mean flying ‘king’fish art!

 

[kingfish254]

Left side is mounted

 

[kingfish254]

The whole chainfenderskirt assembly.

 

[kingfish254]

Fish and Pee-boy shots