20 Incher

[sdframe]

I think it's a Thunder Road, but not sure. Lotsa fun.

 

[The Renaissance Man]

Looks like a wheelie machine!

 

[sdframe]

Sometimes it felt like it when I accelerated and the front spring unloaded.

 

[rrtbike]

I bet that's fun to ride!

 

[Eliminator3speed]

Where did you get the offset manifold? I tried putting a motor on my eliminator and I didn't have enough room to put the carb on.

 

[wheelbender6]

https://www.ebay.com/itm/163105172250
https://www.bicycle-engines.com/z-intake-manifold/
Back in the good old days, we cut the manifold in two pieces and connected them with a short piece of heater hose from a car to make it flexible. You then had to secure the carb to seat tube somehow so that it wouldn't bounce around.

 

[sdframe]

They're cheap and common on eBay. Measure the distance center to center of the mounting holes, they come in 32 and 40 mm sizes.

 

[Degoragon]

Where did you get the offset manifold? I tried putting a motor on my eliminator and I didn't have enough room to put the carb on.

Ebay has them. I bought one for my bike , when I was still running the stock carb. If you run the Dellorto SHA 15 carb, you can get a CNC "shorty" intake.
(Short Offset stock carb)
https://www.ebay.com/itm/32-40mm-Si...=223388289751f89430c96d6b46f08c1ae90bc88ca5c8




(CNC short Intake for Dellorto/Runtong SHA Carb )
https://www.ebay.com/itm/Universal-...435587?hash=item2cdbfe46c3:g:xFQAAOSwlddcZ4hJ



Note: Intakes designed for the Dellorto SHA will not fit with a stock (NT/Speed) carb!

 

[rrtbike]

I think it's a Thunder Road, but not sure. Lotsa fun.

View attachment 83966

Looks like it needs a banana seat too!