Rat Rod
Owner & Founder
These are due out in September/October 2015 with an MSRP of $849.00.
Frame: 6061 Alloy Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, Seatstays Wrap, Disc Brake Tabs, 100mm BB, 170mm Spaced Dropouts
Fork: Full Cr-Mo Landing Gear, Disc Tabs, 450mm Axle to Crown, 38mm Offset, 135mm Spaced Dropouts
Crankset: SE 3-pc Cr-Mo, Closed-End Invisibolt, 175mm, Sealed Bearing Euro BB, 200mm Spindle, 27T Alloy SE Racing Sprocket
Pedals: X-.... Low-profile Platform w/ Removable Pins
Chain: KMC Z410A
Wheelset: Alloy 36H Hubs, Sealed Rear, 135mm F & 170mm R, w/ SE Bubble Fat 65mm Rims, 14T Cassette, Stainless Spokes
Tires: Vee Tire Co x SE Racing Chicane, 26” x 3.50” F & R, 72TPI
Brakes: Tektro MD-280, Mechanical Disc, 160mm Rotors
Brake Lever: Tektro MT2.1, 2-Finger Alloy
Headset: Tange IS24 Sealed 1-1/8” Integrated Headset
Handlebar: Cr-Mo Big Honkin’ Cruiser Bar, 29” x 6”
Stem: Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts
Grips: Special Edition ODI Mushroom II Dual-Ply Grips w/ Donuts, Made in USA
Seat: SE Flyer Seat
Seat Post: Retro Fluted Micro-Adjust Alloy, 27.2mm
Extras: Vintage Vinyl SE Racing Padset, SE Chain Tensioners
Weight: 35.10 lbs
Top Tube, Actual- 22.3"
Seat Tube, Center To Top- 15"
Seat Tube Angle- 72°
Head Tube Angle- 70°
Chainstay - 17.8"
Wheelbase- 42.6"
Bottom Bracket Height- 12.4"
Seat Post Diameter- 27.2mm
Stand Over Height- 30.4"
Suggested Rider Size- 5'3"+ (160cm+)
Ed at PlanetBMX.com is taking deposits on these bad boys.
Frame: 6061 Alloy Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, Seatstays Wrap, Disc Brake Tabs, 100mm BB, 170mm Spaced Dropouts
Fork: Full Cr-Mo Landing Gear, Disc Tabs, 450mm Axle to Crown, 38mm Offset, 135mm Spaced Dropouts
Crankset: SE 3-pc Cr-Mo, Closed-End Invisibolt, 175mm, Sealed Bearing Euro BB, 200mm Spindle, 27T Alloy SE Racing Sprocket
Pedals: X-.... Low-profile Platform w/ Removable Pins
Chain: KMC Z410A
Wheelset: Alloy 36H Hubs, Sealed Rear, 135mm F & 170mm R, w/ SE Bubble Fat 65mm Rims, 14T Cassette, Stainless Spokes
Tires: Vee Tire Co x SE Racing Chicane, 26” x 3.50” F & R, 72TPI
Brakes: Tektro MD-280, Mechanical Disc, 160mm Rotors
Brake Lever: Tektro MT2.1, 2-Finger Alloy
Headset: Tange IS24 Sealed 1-1/8” Integrated Headset
Handlebar: Cr-Mo Big Honkin’ Cruiser Bar, 29” x 6”
Stem: Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts
Grips: Special Edition ODI Mushroom II Dual-Ply Grips w/ Donuts, Made in USA
Seat: SE Flyer Seat
Seat Post: Retro Fluted Micro-Adjust Alloy, 27.2mm
Extras: Vintage Vinyl SE Racing Padset, SE Chain Tensioners
Weight: 35.10 lbs
Top Tube, Actual- 22.3"
Seat Tube, Center To Top- 15"
Seat Tube Angle- 72°
Head Tube Angle- 70°
Chainstay - 17.8"
Wheelbase- 42.6"
Bottom Bracket Height- 12.4"
Seat Post Diameter- 27.2mm
Stand Over Height- 30.4"
Suggested Rider Size- 5'3"+ (160cm+)
Ed at PlanetBMX.com is taking deposits on these bad boys.
