Broken Schwinn Kickstand

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 13, 2009
Messages
1,419
Reaction score
2,100
Rating - 100%
21   0   0
IMG_3045.jpeg
Does anyone have a suggestion on how to remove this broken kickstand pin? I’m familiar with removing Schwinn kickstands, but there’s not enough of the pin sticking out to grab. Suggestions?
 
you have to push the ring in to take the pressure off the pin, then a magnet or gravity will get it out. They generally aren't in there tight, just held in place by the spring tension. But first some WD-40. I use large channel locks to compress the ring. Just bought a schwinn kickstand tool but I don't think it would work with that broken off kickstand.
 
I can get the channel lock method to work releasing the tension, the pin won't fall out. Going to try to clean it with WD 40, see if gravity works, then use a magnet if needed. Will circle back with the outcome. Thanks all!
 

Latest posts

Back
Top