Cable barrel adjuster stuck.....

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 19, 2013
Messages
222
Reaction score
181
Rating - 0%
0   0   0
Chain is broke on gear adjuster...barrel will not screw off to replace. When I turn barrel the whole cable turns with it.
Trying not to break as I don't want to replace cable.......Don't know if I should try and hold cable and force it......
It is an old 3 speed twist grip...looks like it would not be fun to replace. '66 Hi Way Patrol by Columbia.
 

Attachments

  • sa1.jpg
    sa1.jpg
    66.1 KB · Views: 1
  • sa2.jpg
    sa2.jpg
    32.9 KB · Views: 0
Hit it with some PB Blaster and try again in 24 hours. I’ve been using the same can of PB Blaster for 20 years. Amazing stuff and a little goes a long way.
 
Give lube a go. If that doesn't work, you're replacing the chain and rod anyway, so I'd cut the chain to detach it from the cable. Then, you can work on each half as a separate problem--i.e. grasp the barrel and twist the partial chain out.
 

Latest posts

Back
Top