Coaster brake takes two turns!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
What coaster brake hub is it. Post a picture too. The Bendix red band and newer hubs are not to hard to take apart.

Sent from my ADR6425LVW using Tapatalk 2
 
When was the last time is was serviced (taken apart cleaned and re-lubed)? There is no point in speculation until that is done. It cures about 95% of problems.
 
So after following the steps for pulling it apart and cleaning and relubing, it works properly several times then takes a full turn or more then works properly. Only does it every so often. All the parts looked fine. Seems tight enough but not too tight. No play in the hub. :(
 
Hmmmmm. What make is it? Maybe the clutch spring is slightly bent.

Sent from my ADR6425LVW using Tapatalk 2
 
Two turns? The drivers are designed for about 1/2 turn only.
 

Latest posts

Back
Top