Coppertone Fastback: A Penny, Saved

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
:thumbsup:
Dig the seat.:cool:
105574_f59459e45279339c9fac3f7343b4a034.jpg
 
This was the last piece of the puzzle
20191231_201136.jpg


I now have all the bits and pieces... just have to find the time to get them cleaned up and bolted together
 
I'm always amazed at how well old Schwinn chrome holds up.
20191231_211818.jpg


Little by little, the drivetrain is coming together. Thanks again @furyus for the freewheel cluster.
20191231_220439.jpg


Next step is to drag the old girls' Collegiate out of the shed to get the derailleur off it. Should probably grab the brakes while I have it out.
 
Lots of picking away at stuff today...

A couple years ago I took a set of drop bars off a '72 Collegiate and replaced them with a set of traditional North Road-type bars and brake levers that I had around. No recollection of where they came from.
PhotoGrid_1533817230164.jpg


For this build-off, I decided that the Fastback I'm building needs the eye-poker old school levers a lot more than the Collegiate, so I swapped them for a set of ball-end Dia-Compe levers.
20200101_111753.jpg
20200101_111809.jpg


The Fastback bars and stem needed a little cleanup. Balled-up tinfoil worked wonders.
20200101_144406.jpg
20200101_225848.jpg

20200101_144427.jpg

20200101_225843.jpg


Fenders got the same tinfoil treatment. The front one needs its mounting bracket rivets tightened. The rear bears some battle scars.
20200101_162752_1.gif
20200101_214732.jpg
20200101_214741.jpg


Next up: brake calipers and derailleur
 
The front brake had a bent arm. I took the same type front brake off a girls' Collegiate, but the markings didn't match what was already on the Fastback.
20200101_160058.jpg

20200101_160447.jpg


So I mixed and matched the best pieces to get what I needed.
20200101_162133.jpg


The derailleur I got with the bike is pretty badly rusted and seized up.
20200101_153736.jpg


My original plan was to pull one of these.
20200101_151724.jpg


20200101_154521.jpg

But then I found these two on the shelf. #1 is functionally identical to the Sprint that was on the bike, and it seems to move freely without binding, so I am planning on going with that one.
20200101_154130.jpg

20200101_164342.jpg


I like the way it's coming together. Better shots tomorrow in the daylight.
20200101_232452.jpg
 
first chance I've had to get this thing outside in daylight:
20200104_124212.jpg
20200104_124313.jpg
20200104_124339.jpg


little by little. really need to get the front fender rivets tightened up on the bracket, or replace the rivets (pop rivets or nuts/bolts, maybe?).

Also, a new name for the project. I told my wife about how many of the build-off projects have catchy names and I was trying to think of one that somehow related to the color orange. I also told her that the name of this particular orange was Coppertone. After thinking about it for a minute, she said, "How about A Penny Saved?" I think I like it. I'm pretty sure I can consider myself to have rescued it:
20190929_103909.jpg


Tangentially related: FleaBay is a dangerous thing. I have another Mag sprocket and a set of fenders on the way for this one, as well as a front wheel. Just got outbid on a rear wheel, we shall see if I throw another bid before the auction closes later today...
20200104_125621.jpg


Another tangent: too many projects, not enough time. Wish I had the time and resources to enter this one too. I picked it up over Christmas break in NY, but with 6 people and 2 dogs and all our travel junk in one minivan, there was no room to get it home, so it's stranded at my parents' house in NY till I can get back there to pick it up.
20191227_091005.jpg
 
Last edited:
I brought a tandem home (Illinois) from New York wrapped in a shipping blanket and strapped to the roof of our rental van. Don't tell me I can't do something...

Carl.

Sent from across the universe using Tapatalk
 
The good news: we have brakes. And sissy/seat hardware that will actually support my fat butt.
20200111_142804.jpg
20200111_142814.jpg
20200111_142822.jpg
20200111_142830.jpg


The bad news: the Schwinn Stik-Shifter I have been planning to use appears to be off a 3-speed, which means it has a plastic cable guide instead of a metal cable stop. This puts a big kink in my plans.
20200111_144416ar.jpg


Besides that, I don't have an overload tube. I figured I could get away with running without one, but I didn't realize that this shifter doesn't have the stop to take the cable end properly. My options are either chasing down a bunch of expensive parts or using a stem shifter. Augh. Might just use the stem shifter to have the bike done on time, but it's hard to call a late '60s Schwinn done without a Stik-Shift. :confused::eek::(
 

Attachments

  • 20200111_144335.jpg
    20200111_144335.jpg
    220.7 KB · Views: 135
  • 20200111_144416.jpg
    20200111_144416.jpg
    230 KB · Views: 158
Magical Bolt Bucket to the rescue!
20200111_161814.jpg


That and an old derelict set of junker steel brakes. This cable stop and a couple of slightly modified washers fixed me right up.
20200111_162038.jpg
20200111_162045.jpg


Seems to work fine, but of course I'd have to put a chain on the bike and actually ride it to be sure.
20200111_165534.jpg
20200111_165542.jpg


Looks like the chain is the last part I'm missing for this thing to be a rider.
20200111_170039.jpg
20200111_170046.jpg
20200111_170121.jpg


then it's a matter of picking away at the stuff I should have cleaned while it was all apart... :21::rofl::rolleyes:
 
Nice save on the shifter snafu! I always appreciate a ride video in these build-offs. :41:
 
Time's running out and I'm down to just little details. Knocked a couple of them out today and I'm pretty much ready to call it finished.

The black spray bombed seat post clamp has been bothering me. When I got the project, a couple of my buddies commented that it'd be easy to strip that with oven cleaner.
20200125_091431.jpg


Well yeah, but I knew I had this one in my parts stash...
20200123_212407.jpg
20200123_212427.jpg


and it cleaned up a lot easier than having to use oven cleaner. Not near perfect, but looks just about right with the condition of the rest of the bike.
20200123_213817.jpg
20200123_213855.jpg
20200125_093532.jpg


The front fender rattling on its rivets has been bugging me too, so they were eliminated.
20200125_115036.jpg
20200125_115041.jpg


Fork crown and headset chrome needed some attention:
20200125_114019.jpg


Didin't take much to touch them up.
20200125_115426.jpg


It's nasty rainy here today, but it's supposed to be better tomorrow, so I figure I'll take it somewhere to get final pics then.

This build has been a much less dramatic event than some of the ones here with paint jobs and radical wheel and component setups. And I had intended to do a lot more disassembly and documenting and reconditioning of individual components, like in last year's Coda, but that didn't quite happen either. But I'm thrilled about it anyway, just because now I have a decent and somewhat correct Fastback. Can't wait for our first group ride in the spring.
20200125_123033.jpg

(thinking I need to clean that rear tire up a little better before final pics)
 
I really like how this one turned out. It's got a great vintage feel, and you got it cleaned up just right!

That seat fits it perfectly. And sets it apart from all others like it.

I've been watching old Rockford Files re-runs on IMdb TV. I think if Jim Rockford road a muscle bike, he'd ride this one. :wink1:

rockfordscar.jpg
 
Rockford's Firebird! I was watching old episodes on Netflix for a while, but then they dropped it. Love that car!
PRNDL, try the IMDb TV option. If you have Amazon Prime and are using a Firestick you should be able to find it in the apps. It's free, and has all the old favorites. I'm on episode 15 of the first season, haven't looked ahead to see how many they offer.
 

Latest posts

Back
Top