Looks like the rims will polish up a bit. It’s taking forever so I moved into the house where it’s warmer and I can watch videos while I polish.
SWB0 Grand Jubile the French Connection
- Thread starter Pondo
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
A good long while later the wheel is actually looking pretty good. I’m not sure it’s worth the effort but the results are good.
No time to get into polishing the rear wheel today so I put a coat of wax on the frame to see what it would look like. It gave it a nice bit of gloss , more than I expected. Next up, order some parts.
No time to get into polishing the rear wheel today so I put a coat of wax on the frame to see what it would look like. It gave it a nice bit of gloss , more than I expected. Next up, order some parts.
2 hrs into the rear wheel. Filed and sanded some bad spots, sanded the brake surfaces, polished, tensioned and trued (ish). But I’ve still got $0 into this wheel. It’s better than the wheels that came on the bike with the Shimano 600 hub, good quality double wall rim and stainless spokes. The front wheel has a similar double wall rim but galvanized spokes and Normandy hub. Still a decent wheelset for this price point. Now to true the front wheel and install the tubes and tires.
Last edited:
Unable to do tires due to a faulty pump. I’ll have to find my other one tomorrow. This seatpost is more gouged up than any I’ve seen before.
I hit it with a file, 60 & 220 grit sandpaper and a little aluminum polish. That’s as good as it’s going to get. I wonder if it was the right size post, these French bikes use odd sized tubing. It fits well enough and with some grease should be good for another 40 years.
I polished the stem a little too. Not perfect, just a bit of a clean up. I want this bike to keep its lived-in feel.
I’m sick of polishing, I’ll get back to it tomorrow. And maybe start another build.
I hit it with a file, 60 & 220 grit sandpaper and a little aluminum polish. That’s as good as it’s going to get. I wonder if it was the right size post, these French bikes use odd sized tubing. It fits well enough and with some grease should be good for another 40 years.
I polished the stem a little too. Not perfect, just a bit of a clean up. I want this bike to keep its lived-in feel.
I’m sick of polishing, I’ll get back to it tomorrow. And maybe start another build.
Got the new Schwalbe tires on. These were on sale for I think $12 each. Perfect. They look great on there too.
Seatpost and stem installed with plenty of grease.
This saddle doesn’t fit the seatpost. It’s on there for now but I’m going to have to swap out the seatpost.
Looking good with seat and bars. These Wald bars are a bit heavy but should be comfortable.
Seatpost and stem installed with plenty of grease.
This saddle doesn’t fit the seatpost. It’s on there for now but I’m going to have to swap out the seatpost.
Looking good with seat and bars. These Wald bars are a bit heavy but should be comfortable.
I got some nice Tectro brake levers
I need to figure out a way to trim holes in the ends of the grips that looks decent since I’m using bar end shifters
With levers and shifters
Shimano 600 rear derailleur to match the other 600 components
I wasn’t sure if the cranks had French threading but these MKS pedals threaded right in by hand so good to go.
I need to figure out a way to trim holes in the ends of the grips that looks decent since I’m using bar end shifters
With levers and shifters
Shimano 600 rear derailleur to match the other 600 components
I wasn’t sure if the cranks had French threading but these MKS pedals threaded right in by hand so good to go.
Getting better and better
Yes! I’m a big fan of cruiser bars in old 10 speeds. I call them gentleman’s bikes.
It needs a nice bell.That’s the perfect description
I actually do have a nice vintage bell for it, just need to dig it out.
