I needed a more professional wheel stand and with no money but some scrap angle iron, unistrut, a chop saw and my trusty welder I fabbed this up. It has holes for 5/16", 3/8" and 1/2" axles. The verticles can slide to accomadate axle lengths. Those are unistrut spring nuts. I cut the springs off.
Tighten one vertical to the unistrut, put the wheel in.
Slide them together and tighten the other bolt.
The locking hardware.
I even painted it! :mrgreen:
Tighten one vertical to the unistrut, put the wheel in.
Slide them together and tighten the other bolt.
The locking hardware.
I even painted it! :mrgreen: