• [1] VeloSolo 6-Bolt Cog, this will drive the trike conversion
• [1] Cannondale Rush swing arm with Disc Brake dropouts
• [1] 26" Bent Springer Fork
• [1] Trike Conversion
• [2] sets of YST BB 3 piece crank conversion
• [2] sets of Sinz 140mm silver cranks
• [2] sets of Sinz 42T silver chain rings
• [1] of Sinz 36T silver chain ring
• [1] Fox Float 6.5" short shock Will assemble it all together when the 6-bolt Shimano Deore comes in..
Looks good but I'm confused on the rear suspension. Is that a shock from just below the rear seat to the swing arm? Do they make a reverse spring shock that you "pull" instead of "push" or am I missing a component?
technically the arm supposed to do a push/pull..
since the huffy/ WD tandem frame has an odd setup I'm converting it to pull/push..
was fooling around with a cardboard cutout of the rear triangle with the seatpost in
seeing the direction and angle of the shock play.. it will pretty much do the same thing but in a
different location..
i will utilize the rear disc brakes since 160mm rotor size might clash/hit the Velosolo 6-bolt 18T
cog i'm going larger to 180mm so there's clearance between the caliper and the chain drive.