It’s a bird

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
May 21, 2015
Messages
909
Reaction score
3,546
Location
Charlotte NC
B16B6B20-7B96-476A-9E98-1B2E83F489AE.jpeg


Was bending some 1” mild steel just playing around, then later that night saw the new build off, so what the heck, I’ll play along.

Between working away from home half the month and other things, it may not get done. Stay tuned for some of the slowest progress ever!
 
Sleek lines from what you are showing so far. Hope you find the time to finish it.
 
I’ve not seen that one before, but I might give it a try. I have the HF notcher, but it’s not perfect, and I really wish there were fine-toothed hole saws that weren’t of machine shop premium pricing. Always a fair bit of cleanup with the notcher. Nova cycle supply has a similar calculator on their site, (which I also haven’t used.) This is a good vid of notching with neither calc nor notcher:
 
Last edited:
I love the flow of the rear end on that mockup!
Twin top tubes are always cool too.
 
Nice work got some cool lines . A little bit Rat Fink [emoji1303]


Sent from my iPhone using Tapatalk
 
Some work on chainstays today.
33BB6A6A-8D06-48C4-BD1F-8068BF5CD8CB.jpeg

An upward bend to bring them up from the BB to maintain an axle-axle visual line.
006F8095-8F22-40DC-8C4B-7FDF05883650.jpeg

A second bend to make the proper lateral spacing. Compound bends are tough, especially doing them by sight/feel and nothing but a conduit bender!
D1279387-C3A0-4098-A730-0A8D08337EBF.jpeg

But, some patience & a little grinder work later, they’re notched to attach to the BB.

I’ll slot them where they’ll attach to the dropouts, then slot and shape the tube for behind the dropout that attaches to the seatstays... Another day.

Eventually, the weather will warm, I’ll set up my welder and the jig, then start sticking it all together. Eventually.
 
It’s a bird!View attachment 70086
Or a fender ornament.
Maybe a 3D headbadge.
Or maybe just a part I borrowed from the trophey construction room at the motocross where I worked when I was a kid, that has found a new life. :happy:

I love adding trophy toppers to my bikes. I've done it a few times.
 
Centering cones:
0DF157BF-BBFF-4062-9B6C-756D2B4E3E8A.jpeg

Solid brass low-flow shower head, $16
0080FA29-11FF-4E37-B9F2-FAE46F28FA90.jpeg

58B4C03F-C81D-4926-9DB3-AC0E2CF84E87.jpeg

Disassembled.
x2
1/2” bolt fits perfectly. Some washers & nuts & ta-da!
9DCC221B-47A4-4773-A869-D8A0FB4AEBDE.jpeg
D8899770-510E-496A-9E2A-88F289C07564.jpeg


A close fit on a standard 1-1/2” O.D. bottom bracket. (There are smaller sizes, so be sure to get the larger shower head of you try this.) Works even better on the smaller O.D. 1” head tube. Would work on standard head tubes for 1-1/8” steerers, too, as they’re typically 1-1/2” O.D., but probably not the oversize ones.

I still need to arrange a fixture for mounting to my jig, but this is a start.

FWIW, chopsource.com sells frame jigs for motorcycles, and will sell only the centering cones for bike builders. 3 cones for $73 = $24 ea, (or 5 for 120) so, I only saved $8 or less each for this hack method, but thought I’d share anyway.
 

Latest posts

Back
Top