Agreed, I placed it on the bottom bar, no contact at full lock in 1st gear. Appendages might be safer now, albeit less of a Rat Fink shifter sticking out of the roof effect...
Last edited:
BO15 ITZARAT - 1928 Schwinn Motorbike (WALK-AROUND + RIDE VIDEO!!!)
- Thread starter OC_Rolling_Art
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Agreed, I placed it on the bottom bar, no contact at full lock in 1st gear. Appendages might be safer now, albeit less of a Rat Fink shifter sticking out of the roof effect...
Love the light and fenders.
Everything, really. The strict straight forks and frame. The flat suspension seat, the chain ring, the handlebars and grips... A feast for the eye.
Thanks @toro1978, I have always been a fan of the early teens/20's bicycles and motorcycles... the simple yet effective geometry of the double-diamond frames, truss rods welded to the forks and the long-spring saddles. This will be my first with 28" wheels, and I have a feeling it is going to ride well!
Forgive me with my lack of familiarities with those on this site; I looked for your entry this year but did not see, are you in it?
Forgive me with my lack of familiarities with those on this site; I looked for your entry this year but did not see, are you in it?
Mail day... a little convex mirror with about a 6 inch focal point will help focus either an LED flame/flicker bulb or a 3" diameter LED halo ring bulb. Or both.
Yes, I am in it, my build is called Carcass, in Class 1. It is somewhere on page two or three, because I haven't been updating in a while, having been working on other builds.
A slick little 12v-24v LED halo ring light came in the mail this morning... I propped it inside the Lucas carbide lamp and ran a heat test and checked light output shortly after. Light is nice and bright at 11.3 (output of Li-Po battery) and after an hour running static on the table (with no breeze from riding), the main housing is holding at around 75 degrees. Happy with that, I thought I might need to put a micro fan inside, but no.
- Joined
- May 18, 2020
- Messages
- 849
- Reaction score
- 3,061
Could you provide a part number, I would like to do the same thing with my Pope.
Yes! The first link come in 60mm, 70mm and 80mm diameter. The second link are lights that I will be testing in a little bit; those may be brighter but I suspect will run hot.
https://www.amazon.com/gp/product/B07WHY1DWM/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B078YKQKX3/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
- Joined
- May 18, 2020
- Messages
- 849
- Reaction score
- 3,061
Thanks!
yes of course, just know the 2nd (RGB) set-up requires a controller.
Way cool light!
That has to be the most technically tested light conversion ever on RRB.
That has to be the most technically tested light conversion ever on RRB.
Thanks Kingfish!
Love the light conversion!
Thanks to you The Renaissance Man!
My 12v LED motorcycle tail light came today, gonna put it on top of the fender after applying 20 years of rust, the finish looks very close to nickel...
Wiring test includes the tail and headlight LEDs.
After dreaming about putting LEDs in the jewel grips for years, I will test them out here. Will drill a hole (Autocycle-style) at the bottom of the bars near the gooseneck for some cloth-covered wiring. I am quite sure this has been done before, though I haven't seen it.
Wiring test includes the tail and headlight LEDs.
After dreaming about putting LEDs in the jewel grips for years, I will test them out here. Will drill a hole (Autocycle-style) at the bottom of the bars near the gooseneck for some cloth-covered wiring. I am quite sure this has been done before, though I haven't seen it.
I have to remember to wear shades to your thread next time!
Looking great!
Really enjoying this one, can wait to see the finished product.
Thanks @kingfish254 ! I am diggin' yours too...
I have to remember to wear shades to your thread next time!
Looking great!
Last edited:
Thank you @Machine Age Victim... I was rewarded by clicking the link in your signature for BO08, I have only seen one carbide tail light ever, super rare, and a super nice bike!
Last edited:
