RRBBO13 J.C. Special / Sharkruiser

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Unearthed a set of juvenile hbars that i think fit the bike better than the wider ones i originally thought of using

gooseneck set forward
42215412991_7bcafb2339_b.jpg

42169229072_999181534a_b.jpg



here is with the gooseneck reversed
42169227982_9f5aedb32d_b.jpg

42169228562_69b221e72f_b.jpg

I wanted them set further back to mimic an indy car windshield / steering wheel
set way back of the car nose
but i think this neck is a bit long so i need to look for a shorter one
 
I think I might have something like that
 
I love those tires on the bike! Really looks good!

As for the stem, I have never liked the backward stems, they just look... well... backward to me. Just my opinion though.

What about a stem with almost no offset. I tried to find a picture and couldn't, but there are vintage stems that the quill bolt also tightens the handle bar clamp. They look cool, wish I had a picture of one for you to see.
 
I love those tires on the bike! Really looks good!

As for the stem, I have never liked the backward stems, they just look... well... backward to me. Just my opinion though.

What about a stem with almost no offset. I tried to find a picture and couldn't, but there are vintage stems that the quill bolt also tightens the handle bar clamp. They look cool, wish I had a picture of one for you to see.

Is this the type you mean...

RapidoStem.jpg


This is the one on the girls Rapido Super Deluxe I got a while back that will be built up for my great-great-niece.

Glen.
 
What about a stem with almost no offset. I tried to find a picture and couldn't, but there are vintage stems that the quill bolt also tightens the handle bar clamp. They look cool,

The Renaissance Man,

Funny you should mention that I found one at a local swap meet last weekend
however it is to wide for the rattrap springer
27413844997_ec0c0be73b_b.jpg


So i was going to maybe try the middle version
but it also is too wide for the rattrap

the far right i had gotten of either a prewar elgin or snyder bucycle
I like how it the extension is low then kicks up
might work backwards because of that design feature
but need to loosen up the bolt to see how it looks on the bike
 
I checked out the prewar elgin gooseneck and it fit half way
I think it looks better but would like to see it all the way down
but kingfish might have the curved crossbar handlebars so i am leaving it this way for now
40495894660_f516116862_b.jpg

the other small issue is the fit of the fender with the smaller tires
this way fit best so far but still needs modifications
running the fender flipped i run into slightly more problems so i need to play around with it a bit
 
Last edited:
Maybe cut the fender off to a point by continuing the lines of the skirts kinda like @Terry66 's HotRodHiggins

hhhiggins_5.jpg
 
Funny you should mention that I found one at a local swap meet last weekend
however it is to wide for the rattrap springer
27413844997_ec0c0be73b_b.jpg


So i was going to maybe try the middle version
but it also is too wide for the rattrap

the far right i had gotten of either a prewar elgin or snyder bucycle
I like how it the extension is low then kicks up
might work backwards because of that design feature
but need to loosen up the bolt to see how it looks on the bike
The one on the left is closest to what I was referring to. Too bad it wouldn't fit the fork.
 
I did some hunting at a recent bicycle swap meet and and my local co-op to find something that will work for the bars / gooseneck
here is what i came across

41719959685_88f667345c_b.jpg


I found a gooseneck that will fit the 24" rattrap (bottom)
but it turns out the bigger 26" rattrap has a slightly larger opening and will fit the other goosenecks I have
Now I have a couple of options
also I found the bars on the right I think where from a juvenile bike
They can be used with bmx style stems
since those also fit the 24" rattrap

close up of juvenile (bottom) and standard bars
40812530320_d872858657_b.jpg
 
Last edited:

Latest posts

Back
Top