TRADITIONAL Jumpy

[twojs.bike]

I have never used that style hub, but have run into a few situations where the inner cable has ferrules in both ends making it impossible to replace the outer cable. My current build off bike has that issue with the brakes. I believe the Shimano positron also has that issue.

 

[Wayne]

Are you sure you are getting a good measurement? Looks like the caliper is not on the carved end. 13/16" = 20.7 mm

This fits a Schwinn, 13/16"... with 7/8" top.

https://www.ebay.com/itm/165572008347

 

[One-eyed Sailor]

Shimano 3S

Ebay has a lot of cable options.
This one allows you to shorten the cable.

Works on SA indicators also. Mounts like this:

 

[Jude Ephesus]

I dunno guys… running out of daylight here and this weekend and next week are pretty busy.

I may not make it!

Final coat of white on frame. Red added to forks.

 

[Jude Ephesus]

Replacement bars in…. Front end will work just fine.

 

[Jude Ephesus]

View attachment 273088

Are you sure you are getting a good measurement? Looks like the caliper is not on the carved end. 13/16" = 20.7 mm

This fits a Schwinn, 13/16"... with 7/8" top.


View attachment 273089

https://www.ebay.com/itm/165572008347

Thanks Wayne!!!!

I think you’re right !!! There’s the post part, then like a sleeve it goes into.

I measured the diameter of the sleeve with the post in it, and I think you’re right!

-I’m sure I have an old Schwinn seat post here somewhere…. Would that be a good test before buying?

My measurement looks super close, BUT, it’s like a $9 tool…..

 

[kingfish254]

Paint is looking good and love the new bars.
Just get a little bit done every day that you can.

 

[Jude Ephesus]

Pedals are in…..

 

[OddJob]

Bring it on home Jude! Got a kool klunker kookin' !

 

[Pondo]

Oh, yeah, you can pull this off. Looking really good. Are those handlebars pretty affordable? They’re really cool

 

[Wayne]

-I’m sure I have an old Schwinn seat post here somewhere…. Would that be a good test before buying?

I would believe that would be a good test.

 

[Jude Ephesus]

Desperation sinking in…..

I spent yesterday at work n family functions, Sunday with Syracuse Classic Bikes at the Syracuse Nationals.

I have a retreat next weekend, celebration of life 3 states away the next.

Will put on the full court press, but I’d rather do this right and not complete vs. cobble the thing together to meet the deadline.

Got a little done this evening.

 

[OddJob]

Paint looks great!

 

[kingfish254]

Love that paint job!

 

[Jude Ephesus]

Front fork is done:

Red with gold pin stripe:

 

[MattiThundrrr]

Front fork is done:

Looks really good. When are you doing the rear fork?

 

[kingfish254]

Nice job striping, I had to look close to see it was vinyl.

 

[Jude Ephesus]

1st coat on fork truss rods.

(FRONT fork truss rods for Matti! )

 

[Jude Ephesus]

Looks really good. When are you doing the rear fork?

U funny Matti!!!!

 

[kingfish254]